Maybe Curtis' first language is NOT English, and therefore does not understand some of the nuances of the language, in which case his English is a dam sight better than my German (and maybe my English).If you want more suggestions, try using a better title, everybody on here will give you their ideas, some may be serious!
Alan
I was curious about the topic of your thread. It only makes sense if you click in your link. If the thread title was 'Can you recommend a supplier of track' you may have got more replies.
So I have used many metres of this flexible track and can recommend it. The only caveat is that it is supplied with screw type connectors, not fishplate connectors favoured by some. Personally, I prefer the screw connectors, They make good electrical connections and if you need to lift the track or point/switch it is very easy to do. I believe that it is Trainline 45 track.
I do have a trainline 45 point and is excellent except that it has a live frog powered by a reed switch. Excellent idea unless you drive a loco against the set direction which fuses the reed switch.
There was a discussion about these points here Alternatives to Train-line45 for R2 points - G Scale Central
As you are in Germany, it is sensible to use them, save some Euro's.
If you want more suggestions, try using a better title, everybody on here will give you their ideas, some may be serious!
Alan
Pickup skate shorting out is a well known issue with Peco points and can be present in both LGB and TrainLine points, peversly with TL points the worst offenders are TL Locomotives! All can be sorted by gentle bending of the sliders, upwards a little to the outside generally sorts the issue. I find it best to remove the sliders before attempting this, doing it in a vice with some pliers.Curtis. Not sure I am really qualified to give a review. In my experience LGB is best but very expensive. I have a few Piko medium radius and they have been completely reliable with no derailments. I think my least favourite are Trainline 45 although the Modell Land look like they are made by Trainline. I bought the Modell Land because they were the cheapest large radius points I could find. One of the Modell Land points is on a fast part of my Railway and I have Never had a problem with derailments. I generally use fishplates but I think the Modell Land screwed joiners work well. All the different makes of G scale track are fully compatable. I started off with Peco G 45 but prefer the higher track profile of LGB track. There is also the problem of pick up skates shorting on Peco points. I run big heavy engines such as the LGB Vik, OBB 2095 and the Rhb GE4/4 and there are no problems on the points with any of them. Hope this helps. Hope all is well with you in Australia.
Good suggestion. I used to take the skates off but leave them on now. The other tip I was given was to put varnish on the rails by the frog. As long as I do this regularly it generally works. The other thing I do is go over the points quickly and never stop on them. I have not had the same problem with Trainline points.Pickup skate shorting out is a well known issue with Peco points and can be present in both LGB and TrainLine points, peversly with TL points the worst offenders are TL Locomotives! All can be sorted by gentle bending of the sliders, upwards a little to the outside generally sorts the issue. I find it best to remove the sliders before attempting this, doing it in a vice with some pliers.
Memories of our sojourn in Berlin in the early 80's, and setting up track on our little balcony in Dickensweg/Charlottenburg.... R1 curves were all that was possible, but much better than nothing. A nearby apartment block, with a peruqueist on the ground floor shopping centre, was owned by a guy with a HUGE LGB layout on the entire roof of the structure! I only went there once, just before we left in December 83. I wonder if it's still there?MaybachMD , I'm going to give them a try. Thanks for the input.
We recently moved into a new place (still in Berlin) and it's going to be a few years until we have a real garden. However, we do now have a nice terrace which I think we can put to good use. Some room there for a load of R3s and some 900mm lengths. It's all very rounded-rectangle at the moment - I'm sure we can improve it.
View attachment 260442View attachment 260443
View attachment 260442View attachment 260443