Massoth ls to LGB dcc interface

scook

scook

Registered
24 Oct 2009
178
leicester, 3cag
Hi all

im planning to add a massoth LS into an LGB Saxon 1k through the dcc interface, the only picture I can find of how the interface cable attaches to the Ls decoder doesn’t show where all of the wires connect to on the Ls, has anyone got an information on this?

B99BC49C-99AF-4189-87D9-EAD89AF5925A.jpeg


thanks Sam
 
idlemarvel

idlemarvel

Neither idle nor a marvel
13 Jul 2015
2,224
Ascot
They used to sell LS decoders with the 10 pin interface cable fitted but not any more, you have to buy the interface cable separately and solder it yourself. A bit tricky and nerve wracking. I bought mine from muns muns and he did it for me.
I thought the LS installation manual gave you the required pin layout?
 
  • Like
Reactions: scook
scook

scook

Registered
24 Oct 2009
178
leicester, 3cag
They used to sell LS decoders with the 10 pin interface cable fitted but not any more, you have to buy the interface cable separately and solder it yourself. A bit tricky and nerve wracking. I bought mine from muns muns and he did it for me.
I thought the LS installation manual gave you the required pin layout?
I have looked in the manual I have and it just shows the picture above and not where each wire connects to
 
idlemarvel

idlemarvel

Neither idle nor a marvel
13 Jul 2015
2,224
Ascot
scook

scook

Registered
24 Oct 2009
178
leicester, 3cag