A
Alco K28
Guest
I'm hoping for some advice/guidance on fitting the Phoenix Big Sound decoder to my Aster/LGB K 28. I have emailed Phoenix but they haven't responded at all to my emails.
My loco has two standard LGB motors, 5v stabilisation circuit and a decoder interface. I have seen the 55026 decoder interface cable is available and wondered if this is compatible with the Phoenix decoder as a 'plug and play' method of installation. I would prefer to keep my loco as original as possible, but realise this may not be the best option.
I am open to track power or battery R/C DCC
Any help gratefully received!
My loco has two standard LGB motors, 5v stabilisation circuit and a decoder interface. I have seen the 55026 decoder interface cable is available and wondered if this is compatible with the Phoenix decoder as a 'plug and play' method of installation. I would prefer to keep my loco as original as possible, but realise this may not be the best option.
I am open to track power or battery R/C DCC
Any help gratefully received!
Last edited by a moderator: