LGB/Marklin 28437 r/r 4/4 2 loco dead !

[DRG11]

Hi All,

Many thanks for all the help ive been given previously on various things, sorry but im here again ..

I have a LGB 28437 Re 4/4 loco that will not go at all, just seems dead as a dodo,

I do not know the loco address otherwise I may be ok, so i have tried to reset the chip which i understand to be inside using #8 but nothing at all

Has anybody any ideas please before I open it up ?,

Many thanks in advance for any suggestions,

Regards Steve

 

[a98087]

Have you been able to read any chip values?

And does it work on Dc?

That’s the limit of my DCC knowledge

Dan

 

[dunnyrail]

What DCC system do you have? You should be able to read CV1 value if you have a DCC system before you even begin to start thinking about a reset.

 

[DRG11]

Hi,

Well ive just tried it on DC and there is nothing at all, checked the switches in the cab as well.

Ive got the Massoth 1210z system,

All i was wanting to do was to change the loco address but it doesn't want to work at all on any address.