LGB Bernina 25392 Trolley
- Thread starter pmindigo
- Start date
Software Tools
Registered
It is an electric railcar not a trolley! 
Do a search on the site for "ABe 4/4" and you should find a number of posts on the topic. You do need to start from the bottom but there are several things to take into consideration.
Do a search on the site for "ABe 4/4" and you should find a number of posts on the topic. You do need to start from the bottom but there are several things to take into consideration.
Last edited:
Thanks, that was helpful…It is an electric railcar not a trolley!
Do a search on the site for "ABe 4/4" and you should find a number of posts on the topic. You do need to start from the bottom but there are several things to take into consideration.
“The search could not be completed because the search keywords were too short, too long, or too common.”
Software Tools
Registered
Try "Opening a LGB 2x39x ABe 4/4 I railcar".... that is the exact title of the post which is most likely to be useful to you.
One of the problems with the Forum is that you cannot search using 3 letters or less. I try to make my post thread title words at least 4 letters or more but this does not help you much. Try ‘Bernina Railcar’. They are pretty easy to pull apart but a devil to get back together with only 2 hands! Most of the screws are underneath but there may be a semi hidden one or two that always confuse. Tis a long time since I pulled one apart, I vowed never again!
EDIT THINK THIS MAY HELP.
Opening a LGB 2x39x ABe 4/4 I railcar
Questions on getting into these railcars crop up about once a year so I though I'd provide some insights gained from opening my Bernina ABe 4/4 I multiple times. The first two pics show the 4 small screws that outwit everyone on their first attempt! Next the location of the other 8 screws...
www.gscalecentral.net
Similar threads
