teddytejero said:
Hi there, thanks for your reply !
I have 2 seperate track layouts (one analog other digital)
The digital track is devided in 2 parts / one with booster section where i wan't to use the braking/stop module combined with a signal
I also wan't to use the breaking module for a timed stop on the analog track. The manual says the module parts are not electrical connected to each other ...
programming the CV for the 55063 is not clear
hope this helps (i will post a picture of the tracks)
Let me see if I understand correctly.
You are intending to use one module to control a DCC layout with a stop signal. I assume that trains will pass in one direction only at the signal. You have a separate booster for the section before the signal. You mention Navigator - is your DC system Massoth? It is also possible to have trains running in the opposite direction without stopping, but that's going to need other controls or manual intervention to prevent disaster!
In addition you have an analog layout where you want to stop trains for a fixed time and then restart. You are not going to slow the trains before stopping. They will stop (and restart) abruptly.
If that is what you are intending, then the 55063 manual suggests that it is possible, but you will need some track contacts and magnets fitted to all your locos, as well as insulated sections of track, of course. Its not entirely clear if the LGB braking module is compatible with Massoth DCC components.
There are a number of variations that affect the physical wiring. The CV programming seems to be fairly simple, but that depends on what DCC system you have.
If you can confirm this is what you intend I will try to send you the wiring diagrams and the CV settings.
Don