Lazy Grange Bay 3...a new start

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,806
4,434
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
As the weather played nice , things progressed to the pondering point..the pavement isn't finished ..its to ponder 20210617_113032.jpg20210617_154532.jpg20210617_154547.jpg20210617_154555.jpg
 
  • Like
Reactions: 1 user

Rhinochugger

Retired Oik
27 Oct 2009
36,715
4,240
North West Norfolk
Best answers
0
Country flag
Wall to wall foamboard :clap::clap::clap:
 
  • Like
Reactions: 1 user

dunnyrail

DOGS, Garden Railways, Steam Trains, Jive Dancing,
Staff member
GSC Moderator
25 Oct 2009
26,169
4,993
75
St.Neots Cambridgeshire UK
Best answers
0
Country flag
Wall to wall foamboard :clap::clap::clap:
Indeed it is, I am currently working on a Boston Lodge lookalike in Foamboard (plastic coated) and lots of scribing. Wish it was all Brickwork like Mike has done, but scribing Slate finish is more of a random job and one that can get too samey if you do too much at once. Then of course there is the old arthritic hand complaining when scribing for too long..... Not saying that Mike has an easy job of it as I have done a Brick build on my line and it takes time and copious quantities of patience whatever you are scribing. Mike has done the war and peace of Foamboard Structures and very very well it has to be said.
 

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,806
4,434
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
*we* have been working on the pavement, for the middle section..along with testing and having visitors..
Evilbay temptation was extreme
And a bargin arived...
After reading the cv address on a programming track..I assumed it was OK...unfortunately I assumed wrong..
The loco chip gave up,as a power buffer , had been fitted ...OK on anolog?.to the sound unit..which was plugged into a interface bord, as well as a xl plugged into the same bord. , the loco is mint..
Lesson learned..
New chip orderd,rewire required...
At the moment it's returned to anolog 20210629_175355.jpg20210701_104856.jpg20210701_105410.jpg20210701_110248.jpg20210702_121516.jpg20210702_121612.jpg
 
  • Like
Reactions: 1 user

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,806
4,434
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
20210702_130207.jpg20210702_121701.jpg20210702_130417.jpg20210702_130538.jpg20210702_131541.jpg20210702_142749.jpg20210702_143114.jpg
 

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,806
4,434
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
So ,we removed the boddy to investigate..
20210702_160541.jpg20210702_160549.jpg20210704_091029.jpgreceived_2989821714562554.jpeg
 

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,806
4,434
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
I have orderd massoth XL chip..and will gut the interface bord , and switch ...and wire directly to the chip..
 
  • Like
Reactions: 1 user

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,806
4,434
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
In the end, I whent for a Xls onbord decoda , plug and play ...plug in the Reed sensors and wheel sensor..
Wire the front lights /rear lights to 1 socket ect...and the cab /top light at the front on there own..
Sounds simple enough..20210710_114823.jpg20210710_124005.jpg20210710_123947.jpg
 

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,806
4,434
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
Then..as seems to be normal these days ..it was time to look at my older saxon meyers, it wasn't running..possibly motor ,or out of quartering..but it needed sorting..
Luckerly. It was just the quartering..removed motor block from loco..reset...turn it over by hand ..runs smooth...rebuild loco..test...
The traction axle wheel set showing signs of wear..crome wearing off..brass showing..so order new axle ect ..received_1518040668588118.jpegreceived_985106108891310.jpegreceived_548657189908572.jpegreceived_230190605597946.jpeg20210710_142605.jpg
 

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,806
4,434
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
So we got the new saxon on its 8 hour test run ...and as is normally the case with these locos .they are like a *Terminator * they just keep going..
Smoke is on function 2...and the new standing sounds are better...on 5?.either way I'm at a quandary ..do I put both black saxon meyers on the same address.. 20210711_171808.jpg20210711_171745.jpg20210711_171309.jpg20210711_171024.jpg20210711_171136.jpg20210711_171339.jpg
 
  • Like
Reactions: 1 users

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,806
4,434
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
Down to see old friends, who have struggled with ill health..And there garden is overgrown, 10 years since a train ran here...7am this morning..jenny and I started...OK I drank coffee.. while jenny cleared stuff away..and I helped were I could..but by 9am..we had a train running..one of the late great John Steers locos..which was nice 20210718_165109.jpg20210718_132946.jpg
 
  • Like
Reactions: 1 users

playmofire

Registered
23 Oct 2010
8,266
853
80
North Yorks
Best answers
0
Country flag
A circuit of track, something to run on it, a chair to sit on while you watch, and a table to put things on. what more could you want?
 
  • Like
Reactions: 1 user

Paul M

Registered
25 Oct 2016
11,881
1,696
60
Royston
Best answers
0
Country flag
A circuit of track, something to run on it, a chair to sit on while you watch, and a table to put things on. what more could you want?
Too true, it's great going back to basics sometimes, as you say, just a simple circle with no fancy bits, can be just as rewarding, and more relaxing than a massive set up with all the trimmings
 
  • Like
Reactions: 1 user

steinman

Comfortably Numb
24 Oct 2009
6,036
678
59
Cleveleys, Blackpool
Best answers
0
Country flag
Nice one Mike, and so kind of you to let Jenny join in , helping mates is a big part of what's this forum is all about , seem to remember many moons ago you supervising myself and netty not far from here with old Trevor's railway extensions.
I'm not sure who will help me keep the trains running in my old age or should my health become an issue , I doubt it will be Mrs J, she's falling apart already, bless her, so I'd better book you and Jenny early
 
  • Like
Reactions: 1 user

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,806
4,434
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
Nice one Mike, and so kind of you to let Jenny join in , helping mates is a big part of what's this forum is all about , seem to remember many moons ago you supervising myself and netty not far from here with old Trevor's railway extensions.
I'm not sure who will help me keep the trains running in my old age or should my health become an issue , I doubt it will be Mrs J, she's falling apart already, bless her, so I'd better book you and Jenny early
I would love to be invited Rick. With everything I miss my friends the most !
 

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,806
4,434
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
A circuit of track, something to run on it, a chair to sit on while you watch, and a table to put things on. what more could you want?
*we *were sat there all day...the most rewarding thing is seeing the sparkle in his eye as he said...you know, I reckon I could extend it a bit...
 
  • Like
Reactions: 1 user

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,806
4,434
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
Home, and 1st things 1st...
The late John Steers loco was placed on the track..anolog ,old...
Switched on the power...fired up the massoth..check the temp in the house 29..
And the loco ran sweetly,which in it self is wonderful, and probmatic, as I was intending on using it as a doner loco for parts.. but now it deserves to join the historic fleet as it is...
The railway worked fine..
And nothings melted ..20210719_151358.jpg20210719_151339.jpg20210719_151319.jpg20210719_151239.jpg20210719_151205.jpg
 
  • Like
Reactions: 1 users

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,806
4,434
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
Today was slightly warm...20210720_155809.jpg20210720_155816.jpg20210720_155847.jpg20210720_155905.jpg20210720_160009.jpg