Lazy Grange Bay 3...a new start

FrenchChuffed

Registered
27 Mar 2016
412
145
Droitwich Spa
Best answers
0
Country flag
your sure putting your 3D printer to good use there, I am so tempted to have a go. But i am only so so with computery things.
 
  • Like
Reactions: 1 user

trammayo

Interested in vintage commercial vehicle, trams, t
24 Oct 2009
22,659
4,665
75
Co. Mayo
Country
Ireland
Best answers
0
Country flag
I think Mike's boxing clever;)
 
  • Like
Reactions: 1 user

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,787
4,415
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
your sure putting your 3D printer to good use there, I am so tempted to have a go. But i am only so so with computery things.
If you can cut/paste , download, ..
Look at thingyverse.. its free..
You down load the *stl* file(which is ziped- means its compressed, you simply un-zip it)open the free slicing software, and open the stl file in it. .
Then save it onto a micr sd card which fits in the printer
 
  • Like
Reactions: 1 user

phils2um

Phil S
11 Sep 2015
1,522
423
Ann Arbor, Michigan
Country
United-States
Best answers
0
Country flag
Mike - you've got enough crates now for the tea tax rebels to start throwing them in your canals!
 
  • Like
Reactions: 1 user

FrenchChuffed

Registered
27 Mar 2016
412
145
Droitwich Spa
Best answers
0
Country flag
If you can cut/paste , download, ..
Look at thingyverse.. its free..
You down load the *stl* file(which is ziped- means its compressed, you simply un-zip it)open the free slicing software, and open the stl file in it. .
Then save it onto a micr sd card which fits in the printer
it looks like there have been a few issues with thingivers with people been locked out is it a glitch or have you had any problems recently Mike.
 
  • Like
Reactions: 1 user

Rhinochugger

Retired Oik
27 Oct 2009
36,558
4,234
North West Norfolk
Best answers
0
Country flag
Well, another gentleman on this forum has accessed something to print for me - I just gave him the link to the item and he downloaded the files and printed it this last weekend. (Currently entrusted to the care of the Post Office.)
 

dunnyrail

DOGS, Garden Railways, Steam Trains, Jive Dancing,
Staff member
GSC Moderator
25 Oct 2009
26,081
4,976
75
St.Neots Cambridgeshire UK
Best answers
0
Country flag
Well, another gentleman on this forum has accessed something to print for me - I just gave him the link to the item and he downloaded the files and printed it this last weekend. (Currently entrusted to the care of the Post Office.)
Yes there are good eggs in the forum that are doing this for those of us that do not wish to make the technical leap into 3D printing thankfully. I suspect in the future that new younger ones will be taking the tech to great places and the abilities of the machines will only get better. Would that 3D printers had been in place around 2000, I would probably have been drawn in.
 

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,787
4,415
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
it looks like there have been a few issues with thingivers with people been locked out is it a glitch or have you had any problems recently Mike.
Hi, sorry , only just seen your replie, no.. I tend to go on during the morning,,as its quite on there.. been printing some new crossing gates
 

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,787
4,415
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
And after a bit of playing around...20210203_205418.jpg
 

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,787
4,415
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
Warm and dry enough to try .. and paint the mallet20210205_105753.jpg20210205_105743.jpg20210205_105733.jpg
 

dunnyrail

DOGS, Garden Railways, Steam Trains, Jive Dancing,
Staff member
GSC Moderator
25 Oct 2009
26,081
4,976
75
St.Neots Cambridgeshire UK
Best answers
0
Country flag
  • Like
Reactions: 1 user

dunnyrail

DOGS, Garden Railways, Steam Trains, Jive Dancing,
Staff member
GSC Moderator
25 Oct 2009
26,081
4,976
75
St.Neots Cambridgeshire UK
Best answers
0
Country flag

David1226

Registered
24 Oct 2009
7,834
7,860
74
Abingdon, Oxfordshire
Country
United-States
Best answers
0
Country flag
My Mum said I would go blind if I elucidated.

David
 

dunnyrail

DOGS, Garden Railways, Steam Trains, Jive Dancing,
Staff member
GSC Moderator
25 Oct 2009
26,081
4,976
75
St.Neots Cambridgeshire UK
Best answers
0
Country flag
Post #3,290 :eek:
You know I had forgotten he had bashed a Saxon into a Harz, made such a good job of it I thought he was repainting a TL one. Thanks for the link Rhino.
 
  • Like
Reactions: 1 user

Rhinochugger

Retired Oik
27 Oct 2009
36,558
4,234
North West Norfolk
Best answers
0
Country flag
You know I had forgotten he had bashed a Saxon into a Harz, made such a good job of it I thought he was repainting a TL one. Thanks for the link Rhino.
I didn't actually know what the conversion was ....... :think::think:

I was astounded that this thread has over 3,000 posts o_Oo_O
 
  • Like
Reactions: 1 user

mike

Master at annoying..
Staff member
GSC Moderator
24 Oct 2009
51,787
4,415
Rossendale
www.gscalecentral.net
Best answers
0
Country flag
No do elucidate please or better still a link please.
It was a damaged saxon meyers.
I saw a bit of potential in it, although it wasn't pretty, beauty's in the eye of the beholder
Today, the cab glazing whent in...
Eventually.
The rear lights are in..after cutting down the rear lighting bord, removing the power socket, and moving a bulb holder, adding the black bevels...well they look great 20210206_191724.jpg20210205_190155.jpg20210206_191648.jpg