HGLW kitbuild with Deltang rc

ge_rik

ge_rik

British narrow gauge (esp. Southwold and W&LLR)
Country flag
Decided it was about time I built a simple diesel kit and installed basic Deltang rc. Most of the builds on my blog are quite complex by comparison so I thought I'd keep this one simple.

The kit cost around £40, plus the battery, wiring loom and Rx65 receiver (another £50 in total).
https://riksrailway.blogspot.co.uk/2018/04/how-i-constructed-hglw-loco-kit-and.html

Still got to do some more detailing add couplings and a give her a final paint job, but this is the result of one day's work.


Rik
 
Last edited:
ge_rik said:
Decided it was about time I built a simple diesel kit and installed basic Deltang rc. Most of the builds on my blog are quite complex by comparison so I thought I'd keep this one simple.

The kit cost around £40, plus the battery, wiring loom and Rx65 receiver (another £50 in total).
https://riksrailway.blogspot.co.uk/2018/04/how-i-constructed-hglw-loco-kit-and.html

Still got to do some more detailing add couplings and a give her a final paint job, but this is the result of one day's work.


Rik
Click to expand...
Nice build Rik, like the sound actually as well. Much like a Tram. Perhaps she could be like many modern views of traction and be a Battery Loco as in real Battery Loco, sound would be fine then.
 
She's now emerged from the paint-shop and had a few more details added - couplings (yes, I know LGB couplings look $#!t , but they make shunting a lot easier - and they are comparatively cheap), buffers (courtesy of Binnie Engineering), radiator and grille (you can just make out the vertical tubes of the radiator behind the grille), exhaust pipe (a la Peldon - ie bits of copper tube and plastic rod), hand rails (bent brass rod and a couple of washers) and a driver (Jon's People).
file.php

.
file.php

.
file.php

.
file.php

.
file.php

Will do a bit more detailing (eg inside the cab), add some nameplates and a number, do some weathering (I don't do ex-works pristine on my railway) and then she can enter service to potter around the sidings at the sawmill.

Rik
 
Last edited:
Great little build!
As discussed at some length in another thread a couple of weeks back, nothing wrong with using LGB couplers - they may not be particularly attractive, but they WORK, which in my book is the most important thing.....

Jon.
 
Zerogee said:
Great little build!
As discussed at some length in another thread a couple of weeks back, nothing wrong with using LGB couplers - they may not be particularly attractive, but they WORK, which in my book is the most important thing.....

Jon.
Click to expand...
Hi Jon
The do sit quite nicely under the Binnie buffers. They don't quite disappear, but they are less prominent.
Rik
 
Last edited:
Hi folks
The weekend weather afforded an opportunity to get out into the garden. Thought I'd give HGLW (temporary name) a chance to strut her stuff. Adds an extra dimension to shunting operations at Peckforton station. A few minor tweaks needed - a bit more weight and I need to widen the back-to-backs as she can slip down where the track gauge widens on some points to accommodate the point blades (see if you can spot her doing a neat little curtsey). Otherwise, pleased to see how well she performs.

Rik
 
ge_rik said:
Hi folks
The weekend weather afforded an opportunity to get out into the garden. Thought I'd give HGLW (temporary name) a chance to strut her stuff. Adds an extra dimension to shunting operations at Peckforton station. A few minor tweaks needed - a bit more weight and I need to widen the back-to-backs as she can slip down where the track gauge widens on some points to accommodate the point blades (see if you can spot her doing a neat little curtsey). Otherwise, pleased to see how well she performs.

Rik
Click to expand...
Lovely little vid Rik, shows nicely the way that a real railway should run. Note the time taken to just detach a few loaded wagons and attach some empties. The real thing used to do this all the time, now pretty much a historical view of things. Well not quite but nearly. Just so much more interesting than watching them go round and round and round. Though that is ok at times as well.
 
dunnyrail said:
Lovely little vid Rik, shows nicely the way that a real railway should run. Note the time taken to just detach a few loaded wagons and attach some empties. The real thing used to do this all the time, now pretty much a historical view of things. Well not quite but nearly. Just so much more interesting than watching them go round and round and round. Though that is ok at times as well.
Click to expand...
Thanks Jon. Having an extra loco at Peckforton certainly adds operational interest - and I'm sure there are prototypical precedents as well. I might even consider using my Simplex as a shunting loco at the copper mine - though I maybe need to add another couple of sidings there to give it something to do.

Rik
 
ge_rik said:
Thanks Jon. Having an extra loco at Peckforton certainly adds operational interest - and I'm sure there are prototypical precedents as well. I might even consider using my Simplex as a shunting loco at the copper mine - though I maybe need to add another couple of sidings there to give it something to do.

Rik
Click to expand...
Not unusual to have an Industrial Pilot at an Industrial Siding that only had a small amount of work to do so no need to beat yourself up about it. Though of course if you desire to add more traffic, who am I to complain? Just thinking about the Cooper Mine you could have Pit Props, explosives, other stores in and perhaps Spoil out in different wagons to somewhere else perhaps for Road Surface Treating or even Block Making another location to think about? Or to your Main Interchange Station.
 
ge_rik said:
Hi folks
...... Thought I'd give HGLW (temporary name) a chance to strut her stuff......
Rik
Click to expand...
It's a little known fact that HGLW was a mythical Norse creature. Supposedly had a steel belly that scraped along the ground causing sparks. But best known for the noxious odours and blue vapours that were emitted from the breathing hole near its head.
o_O :D
 
gregh said:
It's a little known fact that HGLW was a mythical Norse creature. Supposedly had a steel belly that scraped along the ground causing sparks. But best known for the noxious odours and blue vapours that were emitted from the breathing hole near its head.
o_O :D
Click to expand...

:clap:
Actually, when I type hglw into google it offers me something in Arabic script. Just tried Google Translate and hgl translates from Arabic to mean 'partition'. It auto detects hglw as Welsh which then translates into ........ hglw! So maybe it's a breed of Welsh dragon?

Rik
 
So............
Nameplates in Arabic script?? Or 'Idris' (the little dragon from Ivor the Engine!)??
:think::):):)
 
ge_rik said:
:clap:
Actually, when I type hglw into google it offers me something in Arabic script. Just tried Google Translate and hgl translates from Arabic to mean 'partition'. It auto detects hglw as Welsh which then translates into ........ hglw! So maybe it's a breed of Welsh dragon?

Rik
Click to expand...
Oh I forgot about Welsh. Surely if would be HGGLLW ?
 
You must log in or register to reply here.
Back
Top Bottom