I have a Massoth Control System that I am having an extremly difficult time getting the feedback module to recognize contact inputs from the Massoth digital contacts as they are triggered by the train magnets Just cant seem to have it happen Any thought
Help with massoth feedback module
- Thread starter Secondmates
- Start date
Does the Feedback module trigger as expected when you short one of the contacts (i.e. 1a) with GND on the module?
Have you wired the Digital contact correctly? You should be able to test that the contact is triggering by using a multimeter set to "Continuity" across the contact switches (the contact will still need to be connected to a power source. The multimeter shold show open circuit until triggered by a magnet.
Have you wired the Digital contact correctly? You should be able to test that the contact is triggering by using a multimeter set to "Continuity" across the contact switches (the contact will still need to be connected to a power source. The multimeter shold show open circuit until triggered by a magnet.