Finding LGB Push-Connectors (for use with decoders)

curtis

curtis

Registered
Country flag
Apologies if this is the wrong place to ask this question - mods, please feel free to move.

I'm looking for a source of these (or equivalent) for use with connecting my locos to their decoders as they are very equivalent. I was going to order from the shop below (always happy to support specialist hobby stores) but shipping is being calculated at ~€20 which is too steep for something that should be portable via an envelope (I'm assuming it's a 'standard' shipping calculation)

BTW_140117.jpg
 
Sockets I bought from my local train dealer: All Aboard. I unfortunately don't know what they are called - I just called and asked for the part, and they sold me 30 or so. I doubt it's cheap to ship from Australia to UK, alas.

If you instead want pins (e.g. to mount a different decoder into the existing LGB board), I found that trickier. In the thread Greg linked, Muns links to ETTINGER 13.14.419 terminal pin (1.3mm). I bought 50 of these (equivalent) and they fit nicely.
 
Greg Elmassian said:
Is this recent thread helpful?


Greg
Click to expand...
Not specifically for this, no. It was, however, a very interesting read and I learnt a lot. Thanks for sharing!

phils2um said:
Post #5 by Mark in this thread is probably the most useful for finding these connectors. Installing a Massoth eMotion XLS in an early LGB Ge 4/4 III
Click to expand...
Excellent, thank you all. I've ordered some (along with some capacitors to get past the minimum order value for 'handling')!
 
You must log in or register to reply here.
Back
Top Bottom