curved viaducts

Philbahn

Registered
Country flag
Annieshalt mentioned at our opendaythat he wold like a viaduct, BUT, Curved. Only 900mm tall and only single track. Heres how I am approaching it.

19 mm MDF cut into the correct curve. Don't forget the outer radius is bigger than the inner.

Arround the curves 6 mm MDF 50mm wide pinned and glued to the formers
dc93da77e2b441ada8512729e73f9980.jpg
 
Next work out the radius of the arches this determines the next pice of wood height.
In this case 185mm rad so I got my MDF cut to 225mm and glued andd screwed this to the opposite side of the formergoing the opposite way
71b2a5d33fb5454bb36dbfeb41a98438.jpg
 
Because the viaduct is 180 degrees two inner and two outer formers like this were made. The middle of the former is 100mm wideand the returns on the top were 35mm wide pluss two layers of 6mm 182 mm over where the track will fit.
e617fe8305084ff482343146c64ce30d.jpg
 
Legs next. Thought I would make them a bit thinner than on my viaduct.
They taper both ways 100 wide at the top tapering up to 125 at the bottomthis way a small tenon can be formed to key the legs into the top. The sides of the legs taper from 50 mm at the top to 75 mm at the bottom
8f6e7f67d3cd4c95801f7f0c4c08eaa8.jpg
 
A total of five legs were neededand spaced equi-distant to each other
4703015305484006941a251f05d5d75c.jpg
 
Thats all so far just awaiting final measurements for width off Allan
 
dear phi , stopped raining, so final measurements are.

center of rail to opposite center of rail = 49 and3/8th inches.
the small straight in the center of the curve is, 2and1/4 inches.

hope this helps. ps the form work looks fantastic.

here i sit waiting in anticipation. now i need to find blue floodlights for it??????.
 
This great!! I look forward to seeing it continue- please keep the level of detail- i want attempt this at some point. How will the arches get formed?
 
At first I thought about cutting the arch in the side MDF but the arch expands as you go from the inner to outer. The latest plan is to fill the arches with foam. Four pieces 25 mm thick. The intricate biit is to sculpt the foam to shape.. Hoping thatit will stand laminating
 
you can always try plasticard phil , i know it will cost(argh) . i only hope i dont :bleh:pass out at the bill!!!.
 
Nice job!:thumbup:

Mick
 
annieshalt said:
you can always try plasticard phil , i know it will cost(argh) . i only hope i dont :bleh:pass out at the bill!!!.

So far you are up to 200:thumbup:
 
Philbahn said:
annieshalt said:
you can always try plasticard phil , i know it will cost(argh) . i only hope i dont :bleh:pass out at the bill!!!.

So far you are up to 200:thumbup:

Sorry forgot to add screws, thats 200 screws and a bottle of glue:laugh::laugh:
 
Four layers of foam squeezed in
cac61965815d4f4a8b3f18e2047e03f6.jpg
91a6b0c423384e019bfaf5c93c0a877e.jpg
and ready for sanding
 
Any gaps to be filled in with decorators filler or similar filler
 
Brillaint Phil may i have a 6 foot straight one 9 " deep :bigsmile:
 
i only hope the garden is big enough to hold all who want to come and run over a rad1 viaduct phil. been out today and gott more vitals in , barbie stuff, pies& non get drunk stuff for them who is driving 1.400 tea bags and anne will provide her home made stuff (yum yum ) pies quiche, curry, curled up sarnies etc, (guest of honour ) well lets see???,
 
annieshalt said:
i only hope the garden is big enough to hold all who want to come and run over a rad1 viaduct phil. been out today and gott more vitals in , barbie stuff, pies& non get drunk stuff for them who is driving 1.400 tea bags and anne will provide her home made stuff (yum yum ) pies quiche, curry, curled up sarnies etc, (guest of honour ) well lets see???,

Don't get too carried away it's only going to be seen by us few!!!!!!!!!!!!!:laugh::laugh::laugh:
 
Well my bit is done now .Allan & Ann have just called and collected the formwork. Over to you Allan, we are expecting it to be done tomorrow. Don't forget to podge it.
 
annieshalt said:
i only hope the garden is big enough to hold all who want to come and run over a rad1 viaduct phil. been out today and gott more vitals in , barbie stuff, pies& non get drunk stuff for them who is driving 1.400 tea bags and anne will provide her home made stuff (yum yum ) pies quiche, curry, curled up sarnies etc, (guest of honour ) well lets see???,
count me in please
 
Back
Top Bottom