Cura Settings Ultimate Guide – Settings Explained & How to Use

[GAP]

Because my new printer is not listed in Creality Slicer, the one that comes with it, I decided to use Cura as my slicer for it.
Being a total novice with Cura I searched the net looking for tutorials and found this.
It explains the various settings clearly and I thought it may be of some use to others.

Cura Settings Ultimate Guide - Settings Explained & How to Use

Cura has plenty of settings that contribute to creating some great 3D prints with filament 3D printers, but a lot of them can be confusing. There are pretty good explanations on Cura, but I thought I’d put together this article to explain how you can use these settings. So, let’s look at some of...

3dprinterly.com

 

[GAP]

I followed this guide and while doing it I learned a bit about Cura.
Another benefit was that I used the setting on my Creality Slicer which is derived from Cura and found the similarities are quite close.
Another bit added to the learning curve.