Hi all, I recently purchased an LGB 23881 Uintah mallet, I run DC track power through the RCS Titan trackside. Anyway, the locomotive had a Massoth eMotion ME 8210088 Decoder and sound card installed, which will run on DC at a restricted speed.
I have tried disconnecting the Decoder and the locomotive did not work at all.
I am wondering 1. does anyone have any photos of the original electronics for the 23881 mallet as I have been unable to find any to see if anything else was adjusted?
2. if someone has a massoth DCC controller can the card be set for DC track power.
Thanks for your help in advance
I have tried disconnecting the Decoder and the locomotive did not work at all.
I am wondering 1. does anyone have any photos of the original electronics for the 23881 mallet as I have been unable to find any to see if anything else was adjusted?
2. if someone has a massoth DCC controller can the card be set for DC track power.
Thanks for your help in advance