CNR Caboose Scratch Build

[Carleroo]

I just finished my first ever scratch built project, the Canadian National Railways Caboose. I constructed this from various parts left over from previous kits. I had done 14 Occre tram and train kits, plus a few ships, so I had a closet full of materials. I also sourced a number of items from various supplier and helpful train buffs, including a local dollhouse supply company.

I attempted to make this a 1:32 scale, but in the end it was not consistent. Some things are in scale, and some things too large or too small. The observation cupola is oversized as are the side windows, and some of the interior fixtures are way off. Notice how the Corn Flakes box is the size of a 5 gallon can! I used microscope glass for the windows, doors open and close as do the cupola windows and the toilet wall slides up and down for abetter view inside.

I also made the roof removable so I can add details inside. The fit is not perfect, unless I press and hold down the roof!

Despite this, I am quite pleased overall. I was able to source original drawings from a Canadian National archive and also took detailed photos of existing cabooses.

I have added some photos.

 

[dunnyrail]

I just finished my first ever scratch built project, the Canadian National Railways Caboose. I constructed this from various parts left over from previous kits. I had done 14 Occre tram and train kits, plus a few ships, so I had a closet full of materials. I also sourced a number of items from various supplier and helpful train buffs, including a local dollhouse supply company.

I attempted to make this a 1:32 scale, but in the end it was not consistent. Some things are in scale, and some things too large or too small. The observation cupola is oversized as are the side windows, and some of the interior fixtures are way off. Notice how the Corn Flakes box is the size of a 5 gallon can! I used microscope glass for the windows, doors open and close as do the cupola windows and the toilet wall slides up and down for abetter view inside.View attachment 303711View attachment 303712View attachment 303714View attachment 303715View attachment 303716View attachment 303717View attachment 303718View attachment 303718View attachment 303717View attachment 303719View attachment 303720View attachment 303721

I also made the roof removable so I can add details inside. The fit is not perfect, unless I press and hold down the roof!

Despite this, I am quite pleased overall. I was able to source original drawings from a Canadian National archive and also took detailed photos of existing cabooses.

I have added some photos.

Nice build with great attention to detail. Holding down roofs can always be a bit tricky. My favoured method is to have a piece of material on the body and roof each end to the same roof profile, a couple of small screws each end or even pieces of L shaped wire can be screwed or pushed in to hold the roof in place.

 

[Carleroo]

Podi caomf xovj hsiev evvipvoup vu fiveom. Jumfoph fuxp suugt dep emxezt ci e cov vsodlz. Nz gewuasif nivjuf ot vu jewi e qoidi ug nevisoem up vji cufz epf suug iedj ipf vu vji teni suug qsugomi, e duaqmi ug tnemm tdsixt iedj ipf us iwip qoidit ug M tjeqif xosi dep ci tdsixif us qatjif op vu jumf vji suug op qmedi.

Vjeplt Fappzseom. O moli zuas ofie ug vji M tjeqif xosi. Vji suug ot tmohjvmz xesqif xjodj dsievit vji qsucmin. Xjip O qatj fuxp ev vji gsupv ug vji suug, vji cedl ug vji suug mogvt ugg vji cufz. Cav O vjopl vjev vji m-tjeqi xosi xomm ci ipuahj vu liiq ov fuxp ev cuvj ipft. O katv jewi vu gohasi uav xjisi vu optvemm vjin. Vjeplt gus vji voq!

You must login or register to view hidden content on this page.

 

[Fred Seider]

Xux! O en wisz onqsittif. Exituni xusl - tisouatmz!

You must login or register to view hidden content on this page.