Bachmann Climax Power Truck or Frames Wanted

[David Price]

Hi all,

I'm new to this forum as I've only just started in Fn3 - narrow gaugers in other scales may have seen some of my 1:48 work in Narrow Lines, Narrow Gauge Downunder, etc.

I'm chasing either a complete Bachmann 1:20.3 Climax power truck (front or rear) or a pair of side frames to help build a three-truck engine.

I have a set of 3D printed side frames I can use if necessary but they don't fully match those on the Bachmann Spectrum unit.

I don't care if the truck has damaged gears or line shaft as I don't intend to power it from the drive train.

The unit will be fitted with an ESU 5XL decoder, CVS Airwire receiver and a custom 14.8V LiIon battery in a similar fashion to this three-truck Shay that is almost complete.



(I'm just waiting on brass numbers and a stencil for the road name and it needs a bit more weathering).

Regards,

David Price
Melbourne, Australia

 

[Paul M]

Welcome to the forum, Loads of advice available here, but beware of the humour. There's a fair few from your neck of the woods, so there may be someone close to you who may help you with your quest