90 Degree Crossover

[Gizzy]

Looking for one of these for a future project, preferably the LGB 13100, but would consider the ART one as well....

 

[Brixham]

Sorry...can't help with the crossing....

But the Aristo item has a very long electrically dead section, if you're running long locos with multiple pickups, ( or battery/live steam ), that shouldn't be a problem.
But short locos running slowly could stutter with poor pickup.

From what I remember of your stock....it's more short than long.

I would recommend you stick to LGB in this instance as the rails are all brass ( except for small sections at the crossing points ) and conductive.

Malcolm

 

[Gizzy]

Sorry...can't help with the crossing....

But the Aristo item has a very long electrically dead section, if you're running long locos with multiple pickups, ( or battery/live steam ), that shouldn't be a problem.
But short locos running slowly could stutter with poor pickup.

From what I remember of your stock....it's more short than long.

I would recommend you stick to LGB in this instance as the rails are all brass ( except for small sections at the crossing points ) and conductive.

Malcolm

Useful information, thank you.

So, following Malcolm's sage advice, I am now only looking for the LGB 13100 crossover please....

 

[Nodrog1826]

Not sure if this helps, and I guess you will have already looked.

There are three from Bishop's Stortford at £22.00 each, BIN, free post, showing on Ebay.

 

[Gizzy]

Not sure if this helps, and I guess you will have already looked.

There are three from Bishop's Stortford at £22.00 each, BIN, free post, showing on Ebay.

No I rarely look at evilbuy?

Do you have a linky please....

 

[Nodrog1826]

There you go Gizzy.

http://www.ebay.co.uk/itm/LGB-13100-90deg-Brass-cross-over-track-/181767227376?pt=LH_DefaultDomain_3&hash=item2a522bc7f0

 

[Gizzy]

Ta Gordon, one ordered.

Now need to get some R2 curves....

 

[stockers]

There are some on Ebay Gizzy! O0