3D printing parts for a turnout

Graffen

Registered
30 Aug 2016
20
2
53
Sweden
Best answers
0
FB_IMG_1565815887688.jpg
Time for a little experiment.

I have some tight radius G scale Aristocraft turnouts that my steamers cant go thru.

So, instead of buying or handlaying new turnouts, I will try to rebuild them into #5's instead.

I used Fusion 360 to CAD design a new frog and the surrounding ties.

It will be 3D printed in ABS+ on my trusty old Wanhao Duplicator 4DS.

Then I can use the points and just alter the radius on the rails.
 

Paradise

Registered
28 Jan 2010
1,244
299
Back Yard
Country
Australia
Best answers
0
Country flag
Good idea! :clap:
LGB R1s are like old shoes. Everyone has a pair or two but often not the best for running. :D
What about the electricery contacts?

EDIT: It is for AristoCraft points, not LGB. Silly me! :giggle:
 
Last edited:

simon@mgr

Aviation, model engineering & all things technical
25 Oct 2009
992
78
Gold Coast, QLD, The Land Downunder
Best answers
0
Country flag
Spotted your post on Facebook, I thought it was a brilliant idea.
 

dunnyrail

DOGS, Garden Railways, Steam Trains, Jive Dancing,
Staff member
GSC Moderator
25 Oct 2009
26,067
4,976
75
St.Neots Cambridgeshire UK
Best answers
0
Country flag
View attachment 255530
Time for a little experiment.

I have some tight radius G scale Aristocraft turnouts that my steamers cant go thru.

So, instead of buying or handlaying new turnouts, I will try to rebuild them into #5's instead.

I used Fusion 360 to CAD design a new frog and the surrounding ties.

It will be 3D printed in ABS+ on my trusty old Wanhao Duplicator 4DS.

Then I can use the points and just alter the radius on the rails.
You may need to lengthen the Crossing and Stock Rails a little if you are using a smaller point to make a bigger one Radius Wise.
3EB2C34E-907D-41EA-ABD5-922927E19F14.png
 
8 Mar 2014
7,806
972
San Diego
Country
Armenia
www.elmassian.com
Best answers
0
Country flag
and re-curve the diverging rails, I think even more tricky. I assume you are trying to make a switch that is curved all the way through the diverging route, i.e. including the rails coming from the frog, as per Jon's illustration? That also will need significant re-curving.

Greg
 

Paul M

Registered
25 Oct 2016
11,777
1,686
60
Royston
Best answers
0
Country flag
I'll be watching this with interest. I've got some old track which I would like to make some points with a some stage
 

dunnyrail

DOGS, Garden Railways, Steam Trains, Jive Dancing,
Staff member
GSC Moderator
25 Oct 2009
26,067
4,976
75
St.Neots Cambridgeshire UK
Best answers
0
Country flag
Very creative! Also, those are some excellent CAD skills!

A question - is this for indoor or outdoor use? How would the printing resin hold up outside?
Yes I was wondering about that but forgot to ask.
 

Graffen

Registered
30 Aug 2016
20
2
53
Sweden
Best answers
0
Very creative! Also, those are some excellent CAD skills!

A question - is this for indoor or outdoor use? How would the printing resin hold up outside?
Thanks, they are meant to be outside. That's why I printed them in white, as white absorbes less heat. I will paint them though.
 

Graffen

Registered
30 Aug 2016
20
2
53
Sweden
Best answers
0
This is how far I've got.
This is a test, so there's bound to be some changes made.IMG_20190816_102222.jpg
 

Paradise

Registered
28 Jan 2010
1,244
299
Back Yard
Country
Australia
Best answers
0
Country flag
It is ABS so probably much the same as a LEGO block. Most of the thermal plastics used in 3D printing are of an engineering quality. They are, although not noticeably slightly porous so a a good host for mold etc. but a decent layer of paint will help with that and also help further protect from UV.
I'm not so sure that being white will stop absorbing heat once painted a dark colour. :think:
 
8 Mar 2014
7,806
972
San Diego
Country
Armenia
www.elmassian.com
Best answers
0
Country flag
Yep, once painted, the color of the plastic underneath is really of no consequence. I'm interested to see the point rails.

Also, FastTracks does not have a G scale jig listed, but I heard they would make one. I have used them in Z scale. Very helpful in cutting the rails and angles, which will have to be done in this case after re-curving the existing rails, but you could make a rail cutting jig yourself, even print one!

Greg