3D dieselette

Chris Vernell said:
Starting to assemble a small lok whose files I downloaded and printed at least four years ago. Call me Speedy.

View attachment 346210
The cab isn’t fastened in place yet. Much bodging to be done before that happens.
Maybe acquire a 3D print of Fezwig to adorn the driver’s bench ;)
Click to expand...
Hey, I'd like to get the stl files of Fezwig so I can put him in one of my locos. :wasntme:
 
Now talking of files to download, whilst I don't have a 3D printer and It's very unlikley I will. I do have a member of the family who does and indeed has made the offer to print stuff if I so need. (There could be a catch in the offer, not sure.o_O)

The rub for me is the 3D section of the forum, I can see the resources/ topic listings but that is all, click on something and now't happens just a piece of text an otherwise blank text box, I must be missing a trick here, and you wonder why I don't have a printer.
 
Fiddly job I’d been putting off: assembling the IP basic chassis for 45mm gauge. Not a hard job for someone with clear eyes and nimble fingers, i.e., not me o_O

IMG_0740.jpeg
Punching one wheel off each axle, thread one spacer on, thread axle through chassis, second spacer, re-attach loose wheel, checking to make sure back-to-back is accurate. I have an Aristocraft track and wheel gauge, but the old eyes are a bit fuzzy :nerd:
The gear wheel on the driven axle took the clumsy fingers a minute or two to slide on :oops:.
However, it is together and the wheels roll freely without excessive sideplay :whew:.
 
Last edited:
Nodrog1826 said:
Now talking of files to download, whilst I don't have a 3D printer and It's very unlikley I will. I do have a member of the family who does and indeed has made the offer to print stuff if I so need. (There could be a catch in the offer, not sure.o_O)

The rub for me is the 3D section of the forum, I can see the resources/ topic listings but that is all, click on something and now't happens just a piece of text an otherwise blank text box, I must be missing a trick here, and you wonder why I don't have a printer.
Click to expand...
Google "Thingaverse" and in the search put something like "G Scales Locomotive" also google stl finder and do a search in there.
All the resources that you will ever need.
I found points to print and they are working well so far. To use them outside I suggest printing them in PETG filament as it is UV resistant plus a coat of paint will help
 
You must log in or register to reply here.
Back
Top Bottom