Wanted LGB circuit board and wiring for Saxon-Mayer Mallett locomotive

[The mechanic]

Hello,

I am looking for a circuit board, isolator switch and wiring looms for LGB 26844 Mayer IVK.. The locomotive was sold with the electrics stripped from it and I am attempting to restore it to something like original. I have attached a screenshot from the LGB parts diagram that shows the board in question.

Thanks for any assistance with this


Dave

 

[Zerogee]

I just MIGHT have one of these in my "bits box" - I stripped the original board from a green IVk when I converted it to battery DCC using the Tam Valley Deadrail system several years back, I can't recall exactly what happened to all the bits but I seldom chuck anything out, I will try to have a rummage over the weekend.

No promises, but fingers crossed...?

Jon.

 

[The mechanic]

Thanks Jon,

I'll keep my fingers crossed!


Dave

 

[Zerogee]

Amazingly, success! The Gods of Railway Modelling must be in a good mood today, as I found the board right in the top of the first box of electronic gubbins that I looked in.... fortunately I had a big sort-out of a lot of my spares and oddments quite recently, and put all spare electrical bits where I could find them!

It's only the board I'm afraid, no switch or wiring harnesses, but hopefully you'll be able to source those elsewhere (or just make your own up) - anyway, the label on the board reads "20841", but it look identical to the one in the instructions diagram - with the sockets for two 55021 decoders.

If you drop me a Direct Message through the forum, we can sort out the details - I don't want anything for the board itself, if you're happy to just cover the postage then that's fine with me.

Jon.