Greg Elmassian
Guest
I'll keep my eyes out for you... one will turn up.
Greg
Greg
Wanted - Aristo Or Similar "barrel Circle" Of 45mm Track.....
- Thread starter Zerogee
- Start date
WKDOR
Registered
Not since July Greg. You really must read the small print!
Zerogee
Clencher's Bogleman
Thanks for your efforts Greg, but that one seems to have been sold a while back, as WKDOR mentioned above.......
If you spot another, could you let me know by PM (or "Conversation", as they are now known) or drop me a direct email to jon (AT) gzg (DOT) com?
Thanks,
Jon.
Greg Elmassian
Guest
Sorry about that, it was in a different language, so I did not read carefully.
Zerogee
Clencher's Bogleman
Thanks, but as explained early in the thread, it's the 32" sub-R1 "barrel circle" that I'm after - like most people on here, I have more R1 curves than I know what to do with...
Now this thread has been revived, though, I'm still looking if anybody has one.....?
Jon.
Trekk
Registered
Ok sorry , good hunting.Thanks, but as explained early in the thread, it's the 32" sub-R1 "barrel circle" that I'm after - like most people on here, I have more R1 curves than I know what to do with...
Now this thread has been revived, though, I'm still looking if anybody has one.....?
Jon.
Zerogee
Clencher's Bogleman
Thanks, but as explained early in the thread, it's the 32" sub-R1 "barrel circle" that I'm after - like most people on here, I have more R1 curves than I know what to do with...
Now this thread has been revived, though, I'm still looking if anybody has one.....?
Jon.
We know a song about that. Don't we children? ..
"So bend them, dear Jon, dear Jon, dear Jon!
So bend them dear Jon, dear Jon, bend them!"
Anyone close with a railbender, Jon??
Zerogee
Clencher's Bogleman
Haha, yes, Phil - I could do that (and Mike the Creaky Beaver has already offered the use of his bender - oo-er....).... but as this is a VERY long term project that I may or may not ever get round to, I think I'll keep looking for the Aristo circle at the moment - if I get to the stage of actually starting the project before I've found one, then a-bending it may well be....
Jon.
Jon.
Haha, yes, Phil - I could do that (and Mike the Creaky Beaver has already offered the use of his bender - oo-er....).... but as this is a VERY long term project that I may or may not ever get round to, I think I'll keep looking for the Aristo circle at the moment - if I get to the stage of actually starting the project before I've found one, then a-bending it may well be....
Jon.
Think you will find USA Trains do one as well??
Ah, I didn't know that Phil? You got a part number I can search for?
Jon.
Can't see it on their site atm.. So have emailed to ask the question..
PhilP.
Got an answer..
I must have mis-remembered..
"Not sure what the diameter of your barrel is but the tightest radius we have is 4 foot
R81100 $79.95 ( on sale this week) case of 12 makes circle".
USA Trains
662 Cross St
Malden, MA 02148
781-322-6084
Trekk
Registered
Part number from my hunt was 11145 , comes as 4 X 90 degree sections
http://www.ehattons.com/29357/Arist...rrel_x_4_pieces_full_circle_/StockDetail.aspx
http://www.ehattons.com/29357/Arist...rrel_x_4_pieces_full_circle_/StockDetail.aspx
Zerogee
Clencher's Bogleman
Yes, that's exactly the item I'm after - the problem is that like everyone else, Hattons have long since sold out of them, even though they are still on their site.... and as Aristocraft doesn't really exist anymore it's most unlikely that they will ever be made again, so I'm on the hunt for a second-hand set!
Jon.
