USA Trains 42ft tank cars couplers

ARIA31

Registered
Country flag
I would like to know if somebody already made the modification to change the USAT knuckle couplers couplers to LGB hook and loop couplers ?
It seems there is an USAT kit but I don't know the part number and I was not able to find it.
Thanks a lot for any feedback !
 
I would like to know if somebody already made the modification to change the USAT knuckle couplers couplers to LGB hook and loop couplers ?
It seems there is an USAT kit but I don't know the part number and I was not able to find it.
Thanks a lot for any feedback !
Are you talking about LGB vehicles? If you are tis a simple swop of types. LGB 64407.
 
I would like to know if somebody already made the modification to change the USAT knuckle couplers couplers to LGB hook and loop couplers ?
It seems there is an USAT kit but I don't know the part number and I was not able to find it.

You can definitely fit hook and loop couplings as most wagons are supplied with both . . .

1752747693171.png

To help you obtain some, the part number is R2050 (R2050 - COUPLER SET (2) (HOOK & LOOP)) . . .

1752747593565.png

Hope this helps

David
 

Attachments

  • 1752747318869.png
    1752747318869.png
    10 KB · Views: 0
Thank you, what you wrote is right.
But it is not the case of these USA trains tank car with a very long rod between the coupler and the truck.
What I am looking for is the part number of the following kit which features this specific S shaped rod.
I will ask to USA trains


3 b.jpg
 
Back
Top Bottom