tramcar trev
all manner of mechanical apparatus...
Ok these are they version 15, revision 5, amendment 3.....Only 1 led needed for illumination and the leads are painted for insulation until they get into the bodywork where wire can be soldered on. the posts on the side screens fit into holes on the car roofs, the front ones will be held in place with wick in super glue ( 1 drop holds a ton).... After coming out of the mold they get a clean up to remove excess resin, then the rectangular areas where the actual destinations fit is masked. 3 thin coats of aluminium paint then sprayed on, this is to prevent the whole thing glowing when illuminated, then 2 coats of topcoat, the masking tape is peeled out and the destinations cut out and pressed in. They can be replaced if the wear or are souvenired from the last tram.
I'm pleased with the final product......
The first pic is of version 1 revision 1, the others sort of show the steps in manufacture.... I need to work on macro photography.
I'm pleased with the final product......
The first pic is of version 1 revision 1, the others sort of show the steps in manufacture.... I need to work on macro photography.



