Spule 4 posted this in the previous thread 'Nasty Surprise'.....
"Quality, that is why if you build your own, you know what you have put into it. My next step will be both volt and ammeters. Oh, and I did forget one bit, even tho my throttle (Aristo TE) has its own fuse, I have added one on the output, "just in case"."
What are members thoughts on adding fuses and where in their circuitry. 8|
I've yet to wire my railway permanently and would like to add some extra protection. I'm using 2 x train engineer receivers fed from separate transformers which only have fuses in their 13 amp plugs (AFAIK).
"Quality, that is why if you build your own, you know what you have put into it. My next step will be both volt and ammeters. Oh, and I did forget one bit, even tho my throttle (Aristo TE) has its own fuse, I have added one on the output, "just in case"."
What are members thoughts on adding fuses and where in their circuitry. 8|
I've yet to wire my railway permanently and would like to add some extra protection. I'm using 2 x train engineer receivers fed from separate transformers which only have fuses in their 13 amp plugs (AFAIK).