Submerging a wagon to clean it?

and its lovely in fife tonight,,, just planted some seeds,,, and as i know f all about gardening i have just

probably murdered 500 plants,,,,,,
You should worry - only after I had planted my Second Earlies did I realise I had mixed compost activator into the holes instead of potato fertiliser...
 
What an incredible idea. I can do it after my shower and before cleaning the bath. Unfortunately I don't have an airing cupboard; people don't do clothes washing in modern houses.

Thank you,

Sarah Winfield
When my son was into Wargaming I used to go with him to their conventions, as well as Model Railway exhibitions. I decided that, on balance, railway modellers washed more frequently...
 
I would think that was encouraging, except that I pnce accidentally strayed into a room full of wargamers in full stride, so to speak, so I know that it is at least potentially damning with faint praise.

Back to Sarah’s question, I use a proprietary soap substitute called “QV” which does an excellent job, but which, if I use her bottle, also gets me into trouble from Jan. Quite a lot of my rolling stock is from kits so the axles aren’t easily removable; I let dry in the sun (that works in Adelaide...) and then give a squirt of WD40 before lubricating. So far so good, and I’ve been doing it that way for 10 years or so.
 
You should worry - only after I had planted my Second Earlies did I realise I had mixed compost activator into the holes instead of potato fertiliser...

So - from garden to compost! That's energy saving cutting out the cooking bit:D
 
Not quite sure about this obsession with cleaning LGB Stock, I like mine all dirty and dusty. In fact with much of my stock I go to the extremes of weathering using spray cans and dry brushing.

However if you do want clean and the Dish Washer is unfathomable. You can do no worse than using a cheep stiff brush to get the dusty crud out. Then to get a nice shiny sheen one of those Shoe Cleaning Pads that you get free in Hotels brings things up rather nicely.

As for leaving things in the Garden you may find this has the opposite effect, crud will bounce up with the rain.

I left some LGB Stock in the Garden for years some of it with Gary Raymond Steel Wheels. Never affected the running at all even the LGB Metal Axles survived quite happily and the Steel Wheels gained a rather nice Rusty effect.
 
No hankey pankey in the shower this morning. Nice clean fun and a nice clean wagon but I must explain I was out of the shower when it entered the water.

While on the subject of wagons. Somewhere on this post should be a photograph of a "make do and mend" long wheel base partly assembled wagon. (This was going to be the LBC wagon of earlier posts)

The wagon comprises a cheap and cheerful wagon body with single wheel LGB bogies, I have yet to add the sole-bar and axle guards.

Before getting my razor saw out to shorten the body does it look un-prototypical with single wheel bogies, please? I could of course invest in double wheel bogies but so far it would have been less expensive to have simply bought a new wagon.

Thanks,

Sarah Winfield
 

Attachments

  • DSC_0159.JPG
    DSC_0159.JPG
    238.5 KB · Views: 0
If it is really dirty, take it apart & wash it in soapy water, scrubbing it with a tooth brush.
 
The wagon comprises a cheap and cheerful wagon body with single wheel LGB bogies, I have yet to add the sole-bar and axle guards.

Before getting my razor saw out to shorten the body does it look un-prototypical with single wheel bogies, please? I could of course invest in double wheel bogies but so far it would have been less expensive to have simply bought a new wagon.

Thanks,

Sarah Winfield

Looks OK to me just as it is. :cool: Why shorten it?
Below is a picture of LGB 4010

4010o.jpg


dsc_0159-jpg.236505
 
Last edited:
Liquid hand soap and a toothbrush!

I like the dishwasher idea, you can get several in at a time! :devil:

Which dishwasher tablet is best or will one of the cheapys do? :giggle:
 
Be careful with the dishwasher. I've lost printing off metal items before (not trains) from the hot water and detergent.
I've also found a molten lump of plastic in the bottom from who knows what?
A gentle warm setting only.
 
My Son-in-Law, not always the sharpest tool in the box, decided it would be a good idea to clean his glasses in the dishwasher. It was neither a happy nor an inexpensive outcome. He ended up making a spectacle of himself.

David
 
Common sense, like, whatever your skin can tolerate.
For the most part, there is no need, per se.

But

A gentle warm water rinse, some liquid dish soap, soft toothbrush, rinse, dry.

I do this often after heavy rain and spattered soil.
Also, when stock gets too grotty. Sometimes it looks right, others, not so much.

Generally, i like clean. Less grit to wear on parts, if applicable. ( real weathering doesnt look as nice, to me, as painted subtle weathering). Less debris in boxes, storage, etc.

Rarely remove axels, but do scrub off old lube, dry, and relube.

Dishwasher....never tried because...tiny stones hard bits, etc, might not be helpful to the washers internal food grinder, pumps, and, once upon a time, the phosphate level in soaps, along with bromine, chlorine, etc., were/are pretty harsh, and could bleach plastic slightly, or remove paint, stickers, plating etc.

I know leaving a tablet of dishwasher soap overnight will bleach out my le creuset stuff a touch....
 
Last edited:
I’ve always used cream cleaner such as CIF/JIF (others are available...) and a sponge prior to repainting stock. It’s quite mild but will lift any oily deposits.

It might get rid of the grime well but it is actually a mild abrasive which will polish. If rubbed vigorously in spots it could change the surface texture compared to the rest. A low sheen surface could end up with glossy patches if you were not careful.
 
All this talk of dishwashers reminds me of an incident many years ago when I was working.
One of the blokes was a bit of a wheeler dealer, always out to make a few bob. He had aquired a quantity of workshop storage bins (Linbins) but they were rather grubby and needed a wash.
Next time the wife went out he filled the washing machine with soapy water & set it going. It was the old fashioned type with the wizzer in the middle.
Swish-swosh went the machine as he dropped the bins in. Then a big bang.
The loose coupled freight train had hit the buffers & the loco was still pushing.
These bins came flying out of the machine in all directions, most containing soapy water.
He never did tell me how he explained it to the wife.
 
You should worry - only after I had planted my Second Earlies did I realise I had mixed compost activator into the holes instead of potato fertiliser...

Does that mean you are growing pre-mashed potato?
:think::confused::rofl::rofl::rofl:

I also now have a vision of someone in the bath, with goggles and a snorkel... Playing with a grubby boxcar, and doing their best Jacque Cousteau French accent!
:tmi::rofl::rofl::rofl::rofl::rofl:
 
Back
Top Bottom