Hi Has enyone fitted a Mosoth XLS sound decoder to this Loco, and what would be the most appropriate sound for it?
Sound for Schoema Diesel LGB 2060?
- Thread starter French Chuffed
- Start date
A small single-motor loco like this doesn't need the power capacity of an XLS - it'll do fine with a smaller (and much cheaper!) LS. The generic "small diesel loco" (KoF) sound file should be fine for a Schoema, so you'd need decoder number 8221100.
If the loco code number is 2060, remember it'll be an old pre-digital gearbox so you'll have to do some extra work isolating the motor and adding one or two new wires - not difficult once you figure out what you're doing, there are several articles in the forum archives that will help.
Jon.
If the loco code number is 2060, remember it'll be an old pre-digital gearbox so you'll have to do some extra work isolating the motor and adding one or two new wires - not difficult once you figure out what you're doing, there are several articles in the forum archives that will help.
Jon.
I would have thought that an XLS is a bit overkill for this, how about a LS instead and the 8221100 Small Diesel Loco (Kof) sounds?
Hi Thanks for that, at least like minds think alike, I have XLS?s in all my others but as you say an LS should do fine. The Schoema is my last loco without sound so appears a bit quiet going around.muns said:snap - went away to make a cup of tea before hitting the post button
Peter. in sunney but very dry South Brittany
