Setting CV's on a MTS Decoder 55021

[bigjack]

I have 2 of my LGB Shortie Loco's with LGB decoders in them. They both have different driving characteristics, and I want to set them so that they both drive the same. I have tried altering the driving curve but to no avail. The only CV that seems to make a difference is CV 5
So My Question is.
1: How do I set the decoder back to factory settings?
2: How do I match them up? as I thought if I alter the driving curve that would do the job.
3: What am I doing wrong?

Over to you.

 

[Gizzy]

I have 2 of my LGB Shortie Loco's with LGB decoders in them. They both have different driving characteristics, and I want to set them so that they both drive the same. I have tried altering the driving curve but to no avail. The only CV that seems to make a difference is CV 5
So My Question is.
1: How do I set the decoder back to factory settings?
2: How do I match them up? as I thought if I alter the driving curve that would do the job.
3: What am I doing wrong?

Over to you.

I can do that for you this Sunday with my MTS PC software....

 

[bigjack]

I have 2 of my LGB Shortie Loco's with LGB decoders in them. They both have different driving characteristics, and I want to set them so that they both drive the same. I have tried altering the driving curve but to no avail. The only CV that seems to make a difference is CV 5
So My Question is.
1: How do I set the decoder back to factory settings?
2: How do I match them up? as I thought if I alter the driving curve that would do the job.
3: What am I doing wrong?

Over to you.

I can do that for you this Sunday with my MTS PC software....

Bring it along mate and we'll have a play

 

[Cliff George]

Hi Steve,

1: How do I set the decoder back to factory settings?

Write 55 into CV 55.

2: How do I match them up? as I thought if I alter the driving curve that would do the job.

It should do.

3: What am I doing wrong?

You have to write one of the bits in CV29 in LGB decoders to enable the user defined speed steps curve. Add 16 to whatever is being written to CV29.

Hope that helps.

 

[bigjack]

Nowt's working now :wits::crying: