Navigator probs
- Thread starter mike
- Start date
I have had to return mine to Massoth, mine keeps going to sleep.
Sounds like a similar problem Roly
I have also returned the receiver just in case.
BTW have you tried it tethered?
Sounds like a similar problem Roly
I have also returned the receiver just in case.
BTW have you tried it tethered?
Roly,
Have you tried resetting the Navigator back to factory settings?
Performing a factory reset will loose any data stores within and any changed configuration settings.
Do the following with the unit teathered:
M3 (Menu) -> Select "Navigaror Config" (M1 repeatedly) -> M2 (OK) -> Select "More..." (M1 repeatedly) -> M2 (OK) -> Select "Factory Reset" (M1 rpeatedly) -> M2 (OK)
It should take abt 40 seconds. See the Navigator Manual (section 5.4.6 i think) http://www.massoth.com/downloads/handbuch/8134001_v150_0707_en.pdf
If that does not sort it try reflashing the firmware or speaking to people at Massoth (call the hotline on a Monday PM (1300-1630 Uk time) or Thursday AM (0700-1100 Uk time) on +49 6151 35077 38.
Have you tried resetting the Navigator back to factory settings?
Performing a factory reset will loose any data stores within and any changed configuration settings.
Do the following with the unit teathered:
M3 (Menu) -> Select "Navigaror Config" (M1 repeatedly) -> M2 (OK) -> Select "More..." (M1 repeatedly) -> M2 (OK) -> Select "Factory Reset" (M1 rpeatedly) -> M2 (OK)
It should take abt 40 seconds. See the Navigator Manual (section 5.4.6 i think) http://www.massoth.com/downloads/handbuch/8134001_v150_0707_en.pdf
If that does not sort it try reflashing the firmware or speaking to people at Massoth (call the hotline on a Monday PM (1300-1630 Uk time) or Thursday AM (0700-1100 Uk time) on +49 6151 35077 38.
Mark mine has gone back after having words with Peter.
Wonder if Roly's will?
My second receiver and hand set are Ok
Wonder if Roly's will?
My second receiver and hand set are Ok
When the train stops, are the 55080's eminating a repeated clicking noise? If they are then they are constantly attempting to switch track power bias due to a short that is not resolved by the bias switch.
BTW, what central station are you using? MTS3/1200Z/800Z ?
BTW, what central station are you using? MTS3/1200Z/800Z ?