Massoth 1200Z to PC

[UKSGR]

Do I need a pc interface to 1200Z to run track control software? Having read Gizzys thread, I was looking for the interface but the Massoth web site indicates that I don't need it. Any help please.

 

[stockers]

You use either the USB or RS 232 connector on the 1200

 

[UKSGR]

That's good, saves some cash. Next question, can the LGB MTS PC software work with the Massoth central station?

 

[muns]

That's good, saves some cash. Next question, can the LGB MTS PC software work with the Massoth central station?

No

Look at the Massoth Web site for a list of compatable software.

 

[Gizzy]

I'm running LGB MTS Paul, hence the need for the LGB 55040 Interface in my case?

For the software, I guess Stellwerk could possibly work with a Massoth 1200Z, but I don't have any experience with either....

http://www.stellwerk-software.de/index_e.html

http://www.stellwerk-software.de/stw_qa10_e.htm

 

[Cliff George]

Go to http://www.massoth.com < Link To www.massoth.com, click on the English web site, then 'products', then 'DiMax Digital', then 'PC Software ...', the list is there. Stellwerk is supported as is RR&Co which I use + about 6 others. Good luck.