LGB Otto.

[Leflick]

Ive been on the LGB website looking for an owners manual, my loco is no longer listed, it is very old, I wanted to find out how to seperate the body from the chassis.
i was thinking of converting to battery and radio control. Any help/advice would be appreciated.

 

[SevenOfDiamonds]

I wanted to find out how to seperate the body from the chassis.

Try TOYTRAIN : : OHO®-Dampflok for an expoded diagram.

From memory, undo two screws on the cab backsheet (either side of the buffer), and two screws under the cab. Then the (green) cab comes away, The (black) boiler is just a clip fit, lifting from the front end.

All the best

David

 

[PhilP]

There are two screws at the front.. Easier to remove the front coupling, then you can get at them..

*I think the Otto, and Oho are the same, just different colours?*

 

[Leflick]

Try TOYTRAIN : : OHO®-Dampflok for an expoded diagram.

From memory, undo two screws on the cab backsheet (either side of the buffer), and two screws under the cab. Then the (green) cab comes away, The (black) boiler is just a clip fit, lifting from the front end.

All the best

David

Thank you for your help.

 

[Dan]

Search the web for LGB 92079 pdf and you will have the print.

I found it here: LGB Manuals : LGB Model Trains, LGB Locomotives, Garden Train Sets, G Scale Model Trains,