ATTENTION MEMBERS WITH ODDS AND ENDS BOXES- white window frame for a space 50mm high by 45mm wide needed

P

playmofire

Registered
23 Oct 2010
6,520
32
North Yorks
I'm needing a white window frame for a space 45mm wide by 50mm high. The type of frame can be seen in the attached photo, but one of the same size but a different design would do. The window frame presses in from the back, but one which pressed in from the front would do.

I'm on the North Yorkshire coast.

121797_6cad5520aef742e46a3c17872e1628b3.jpg
 
P

Paul M

Registered
25 Oct 2016
2,674
89
56
Royston
Have you tried making one? A bit of plastic strip and superglue
 
  • Like
Reactions: mike
P

playmofire

Registered
23 Oct 2010
6,520
32
North Yorks
Have you tried making one? A bit of plastic strip and superglue
I have that in mind as one of a number of possible alternatives, e.g. a boarded up window.
 
Rhinochugger

Rhinochugger

Retired Oik
27 Oct 2009
24,282
215
North West Norfolk
There used to be a Doll's House bits and pieces manufacturer who was listed in the G Scale suppliers - was it Jackson's Miniatures? Carn't remember, but that's where I bought the windows for my combine :nod::nod:
 
PhilP

PhilP

G Scale, 7/8th's, Electronics
5 Jun 2013
22,507
174
Tamworth, Staffs.
that's where I bought the windows for my combine :nod::nod:
It wasn't a brand new combine (harvester) then?
:rofl::rofl::rofl:

(I'm obviously going to have to watch Rik's latest video, calm down, and go annoy some modellers, over at Swadlincote? ) :devil::devil:
 
Rhinochugger

Rhinochugger

Retired Oik
27 Oct 2009
24,282
215
North West Norfolk
It wasn't a brand new combine (harvester) then?
:rofl::rofl::rofl:

(I'm obviously going to have to watch Rik's latest video, calm down, and go annoy some modellers, over at Swadlincote? ) :devil::devil:
Weeeeeeeeeeeeellllllllllllllllllll, it was at the time - but it didn't need a key :shake::shake:
 
P

playmofire

Registered
23 Oct 2010
6,520
32
North Yorks
There used to be a Doll's House bits and pieces manufacturer who was listed in the G Scale suppliers - was it Jackson's Miniatures? Carn't remember, but that's where I bought the windows for my combine :nod::nod:
Thanks, I'll follow that up, and it reminds me, there is W Hobbby's and Hobbies who sell 1:24 building parts.
 
Hutch

Hutch

G Gauge, Raising Peaches, Apricots
1 Feb 2012
345
4
Southwest Oklahoma, USA
I have what appears to be that same Lindberg kit. If you could figure out how to get the window to you at a lower cost than a Lotus 7, let me know.

---Hutch
 
Bill Barnwell

Bill Barnwell

Registered
30 Sep 2017
513
29
74
Ormond Beach, Fl
I'm needing a white window frame for a space 45mm wide by 50mm high. The type of frame can be seen in the attached photo, but one of the same size but a different design would do. The window frame presses in from the back, but one which pressed in from the front would do.

I'm on the North Yorkshire coast.

View attachment 251317
Same ones used it scankits
 
Neil Robinson

Neil Robinson

Registered
24 Oct 2009
9,315
11
N W Leicestershire
"Conversation" started.
 
P

playmofire

Registered
23 Oct 2010
6,520
32
North Yorks
I have what appears to be that same Lindberg kit. If you could figure out how to get the window to you at a lower cost than a Lotus 7, let me know.

---Hutch
I think I might go for the Lotus 7.
 
P

playmofire

Registered
23 Oct 2010
6,520
32
North Yorks
Two windows provided by Neil Robinson. Many thanks, Neil, pm sent.
 
Rhinochugger

Rhinochugger

Retired Oik
27 Oct 2009
24,282
215
North West Norfolk
So when's the Lotus 7 arriving then ? :nerd::nerd::nerd::nerd::nerd:
 
David1226

David1226

Registered
24 Oct 2009
3,503
518
69
Abingdon, Oxfordshire
Finding the right windows can be a bit of a pane.

David
 
PhilP

PhilP

G Scale, 7/8th's, Electronics
5 Jun 2013
22,507
174
Tamworth, Staffs.
But smashing if they do.. :eek: