Aristocraft Wooden Caboose - How do you get in?

Hello
Just bought one of these and I need to get inside to sort out the lighting. I have removed the truck and the four screws in the base but I still cannot see how to get inside. I do not want to risk breakage by prising things apart without knowing what I am doing. Can anyone help please?
Bill
 
electricity_bill said:
Hello
Just bought one of these and I need to get inside to sort out the lighting. I have removed the truck and the four screws in the base but I still cannot see how to get inside. I do not want to risk breakage by prising things apart without knowing what I am doing. Can anyone help please?
Bill
Click to expand...
Pull the roof off.
 
Just pull the cord...

chainsaw-006.jpg
>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)>:)
 
Seriously, looking at the photos I agree with Minimans. It definitely looks as though the roof is clipped in place. I would suggest sliding your fingernails along the side overhangs of the roof to see if there are clips (LGB's standard method) and if that fails try using a small screwdriver which can reach further to try again. If you find clips which refuse to pop open using finger or small screwdriver pressure I strongly suggest using two medium screwdrivers, use one to lever the clip and the other to hold the gap open then slip the first screwdriver in further etc until the clip pops open.
Oh, hang on, it could be glued on. Quick, before the mods spot it, read this:
http://www.aristocraftforum.com/viewtopic.php?f=26&t=10284
 
Last edited:
electricity_bill said:
Bottled out trying to get the roof off. Too easy to damage it. Thanks for your help guys.
Click to expand...
That link that Cap'n Pugwash showed said that the caboose cupola would come off as it was only clipped in, and would give access to the wiring.

If all else fails, call Michael Caine :giggle::giggle::giggle::giggle:

article-2145077-131C03CF000005DC-433_634x324.jpg
 
You must log in or register to reply here.
Back
Top Bottom