gregh
electronics, computers and scratchbuilding

A spell of wet weather prompted me to do some indoor work and make another small shop for my town of Lilyvale. I had an empty wine cask available so used it as the basic 'box'. I clad it with corroflute, which has 'lines' which somewhat approximate weatherboards.
If my usual modelling conforms to the 10' rule then this one is for 20'.
So here's mainly what I needed – wine cask box (emptied first), contact adhesive and corroflute (from an election sign), and something for the roof.

To make it simple, only the front and one side have cutouts. I made the windows and doors from styrene, making larger cutouts in the cardboard to accommodate them.


A big book is a good weight while the contact glue sets to glue the corroflute sides to the box.

The roof is just more corroflute covered with corrugated iron. This is made from disposable aluminium baking dishes sold for BBQs. I flatten it out with a round dowel and use a cardboard corrugator. I used silicone sealant to glue it to the corroflute – even though it's not a 'glue' I find it works well on large surfaces and fills the corrugations to privide strength to the aluminium, which is pretty weak.

I finally decided to make it an Aussie 1950s icon - a Milk Bar, and here it is installed. (it's not left outside)

If my usual modelling conforms to the 10' rule then this one is for 20'.
So here's mainly what I needed – wine cask box (emptied first), contact adhesive and corroflute (from an election sign), and something for the roof.

To make it simple, only the front and one side have cutouts. I made the windows and doors from styrene, making larger cutouts in the cardboard to accommodate them.


A big book is a good weight while the contact glue sets to glue the corroflute sides to the box.

The roof is just more corroflute covered with corrugated iron. This is made from disposable aluminium baking dishes sold for BBQs. I flatten it out with a round dowel and use a cardboard corrugator. I used silicone sealant to glue it to the corroflute – even though it's not a 'glue' I find it works well on large surfaces and fills the corrugations to privide strength to the aluminium, which is pretty weak.

I finally decided to make it an Aussie 1950s icon - a Milk Bar, and here it is installed. (it's not left outside)

