chipping a lgb crock for gorden [pics needed]

[mike]

take 1 perfectly good crock.......

 

[mike]

Re: chipping a lgb crock for gorden

and turn it up side down

 

[mike]

Re: chipping a lgb crock for gorden

remove the inner 2 screws here

 

[mike]

Re: chipping a lgb crock for gorden

pull out plastic pipe here

 

[mike]

Re: chipping a lgb crock for gorden

remove 4 boddy screws at the 4 conners

 

[mike]

Re: chipping a lgb crock for gorden

remove boddy, carefully as gordens watching

 

[mike]

Re: chipping a lgb crock for gorden

get ur self a nice plastic container for the screws, and spare bits......

 

[mike]

Re: chipping a lgb crock for gorden

slide the noses off the base plates, gently.....

 

[mike]

Re: chipping a lgb crock for gorden

take photos off the wireing, ... trust me, if u dont, ull wish u had
plase dont ask how i know

 

[mike]

Re: chipping a lgb crock for gorden

unscrew the electical block, remove all push fit wires.... unscrew the poivet block under it

 

[mike]

Re: chipping a lgb crock for gorden

like so

 

[mike]

Re: chipping a lgb crock for gorden

leaves us with this

 

[mike]

Re: chipping a lgb crock for gorden

remove the crank screws..... and washers under nieth

 

[mike]

Re: chipping a lgb crock for gorden

remove the front coupling hook......
:wave:

 

[mike]

RE: chipping a lgb crock for gorden

because this gives us acess to the plow, which inturn holds the motor block in......

 

[mike]

Re: chipping a lgb crock for gorden

lift it out,

 

[mike]

RE: chipping a lgb crock for gorden

remove hex nut that holds crank on to fake drive wheel....

 

[mike]

RE: chipping a lgb crock for gorden

carefully lift off crank

 

[mike]

RE: chipping a lgb crock for gorden

remove screw from back end off motor block.....

 

[mike]

RE: chipping a lgb crock for gorden

slide out motor block, make brew, we deserve it