Tram Gates

[van5]

How many gates were supplied with LGB trams?

 

[DoctorM]

How many gates were supplied with LGB trams?

New: 4

Second hand: 0, 1, 2, 3 or 4 if you're very lucky!

 

[van5]

I have just found a thread by Madman from Nov 16 2010 with the same question. The most common answer were two gates per unit but some had four and others none!

 

[van5]

Are spares available or can someone "print" replacements?

 

[schienenkönig]

Are spares available or can someone "print" replacements?

Just a question of how many you will need. You can order them at chmpex-linden. See the link below.

https://www.champex-linden.de/cl_ko_ersatzteilbestellung_e.htm

Put in Quantity, than drawing (20350) number (27) The rest comes autmaticly and the price will be shown. 2,95€ per piece + postage + if the order is under 25€ they charge you 5,00 € extra,

Also I will order some spare parts at champex and I'm much more over that 25,00 € limit, so I can order the gates for you as well,

Or a bit cheaper let me know how much you really need. I do have some to share.

Peter

 

[van5]

Thank You Sir
I think that I need three but am thinking of glueing the ones I have in place. I will know more when I get to the stock at the weekend but it is very reassuring to learn that spares are available. Thank you, Regards Derek.

 

[schienenkönig]

Ok, no problem, take your time. I can offer 4 gates for 1,50 € each, plus postage. Cheapet way will be a letter.

Best wishes from Wuppertal.

 

[van5]

Sold.Thank you. How do I pay you, paypal, cheque or what? I do not have your address to send the money etc. I can send Euro notes through the post.
There must be a way of contacting you securely rather than putting addresses on line. My private email is nantman 'at' btopenworld.com.
Thank you so much.
Regards, Derek

 

[stockers]

Use the 'conversation icon, top right, looks like an envelope with an arrow going in it. This opens a private thread between you and who ever you send it to.

 

[musket the dog]

Are spares available or can someone "print" replacements?

If someone could supply the measurements I would be happy to 'draw' up a set for printing.

 

[van5]

Use the 'conversation icon, top right, looks like an envelope with an arrow going in it. This opens a private thread between you and who ever you send it to.

Thank you, Sir. I live and learn. One day I will learn how to copy photographs from Picassa 3 to this forum.

 

[schienenkönig]

If someone could supply the measurements I would be happy to 'draw' up a set for printing.

On Thursday I'll see my gates again and will measure them. I'll put a drwaing on here.

Peter

 

[James Day]

Modell-Land have them too:

http://www.modell-land.de/bhnentren-blinker-straenbahn-23360-m027-p-15225.html

James

 

[Kayanbee]

LGB tram gates and vestibule windscreens are available from Shapeways web site. They are 3D printed and as good as the original