vsmith
G Scale indoors, O Tinplate, Micro Layouts

This is an update for some, for others this may be new, if so you can catch the full history of my on-off-on-off-on-off saga of trying to build a large scale RR on GR, MLS or LSC forums, theres no way to relate 10 years of history leading to my current status, so the rest of your will just have to jump in at this point, suffice to say after 9 years of struggle to build a layout outdoors, moving indoors into the garage then last year tearing out my 10 x 20 foot fixed laout, I ended up last summer with a 5x6 mobile layout with folding wings that made for a 5' x 9' layout...
...well the fold downs turn out to be a real hastle in actual operations, way too much fiddling around with took too long just to get one side set up, so I just left them up, then the misses started fussing about how much room the layout took up and it did take up quite a bit of room so I did some pondering and reevaluation and eventually came up with this reworking
Revised right side with fold downs removed, back to original configuration:
http://1stclass.mylargescale.com/vsmith/Portable Layout Revised 5x5 Scenery001.JPG.JPG < Link To
Reworked front
http://1stclass.mylargescale.com/vsmith/Portable Layout Revised 5x5 Scenery002.JPG.JPG < Link To
http://1stclass.mylargescale.com/vsmith/Portable Layout Revised 5x5 Scenery004.JPG.JPG < Link To
Revised left side, fold down reduced in size and fixed in place
http://1stclass.mylargescale.com/vsmith/Portable Layout Revised 5x5 Scenery003.JPG.JPG < Link To
Revised left side new tunnel face
http://1stclass.mylargescale.com/vsmith/Portable Layout Revised 5x5 Scenery005.JPG.JPG < Link To
Still have a nice outside loop to run bigger equipment on but now have a fixed platform without the hastles of the folddowns or the space problems of the former layout. Plus I can use the outside track as a point to point for the LGB Auto reverser I have and have been trying to intigrate for a while now. This will be getting scenery very soon now.
http://1stclass.mylargescale.com/vsmith/Portable Layout Revised 5x5 Scenery005.JPG.JPG < Link To
BTW total size 5'6" x 5'6"
...well the fold downs turn out to be a real hastle in actual operations, way too much fiddling around with took too long just to get one side set up, so I just left them up, then the misses started fussing about how much room the layout took up and it did take up quite a bit of room so I did some pondering and reevaluation and eventually came up with this reworking
Revised right side with fold downs removed, back to original configuration:
http://1stclass.mylargescale.com/vsmith/Portable Layout Revised 5x5 Scenery001.JPG.JPG < Link To
Reworked front
http://1stclass.mylargescale.com/vsmith/Portable Layout Revised 5x5 Scenery002.JPG.JPG < Link To
http://1stclass.mylargescale.com/vsmith/Portable Layout Revised 5x5 Scenery004.JPG.JPG < Link To
Revised left side, fold down reduced in size and fixed in place
http://1stclass.mylargescale.com/vsmith/Portable Layout Revised 5x5 Scenery003.JPG.JPG < Link To
Revised left side new tunnel face
http://1stclass.mylargescale.com/vsmith/Portable Layout Revised 5x5 Scenery005.JPG.JPG < Link To
Still have a nice outside loop to run bigger equipment on but now have a fixed platform without the hastles of the folddowns or the space problems of the former layout. Plus I can use the outside track as a point to point for the LGB Auto reverser I have and have been trying to intigrate for a while now. This will be getting scenery very soon now.
http://1stclass.mylargescale.com/vsmith/Portable Layout Revised 5x5 Scenery005.JPG.JPG < Link To
BTW total size 5'6" x 5'6"