purple carrot
Registered
Good evening
Could anyone help me with mapping a servo to the throttle dile on a cs3 plus. The decoder driving the servo is a massoth XXL 2 with a massoth 5v regulator providing power for the servo, the cv's are set to speed step auto off and the servo stops at the programmed end points. The trouble I am having is the servo will not track the speed steps of the cs3 throttle, the servo travels the full range at speed step 1 and the servo returns to the home position when the throttle is set to speed mark 0. Are there any hidden CV's that are not in the data book that come with the decoder?
Many thanks
Could anyone help me with mapping a servo to the throttle dile on a cs3 plus. The decoder driving the servo is a massoth XXL 2 with a massoth 5v regulator providing power for the servo, the cv's are set to speed step auto off and the servo stops at the programmed end points. The trouble I am having is the servo will not track the speed steps of the cs3 throttle, the servo travels the full range at speed step 1 and the servo returns to the home position when the throttle is set to speed mark 0. Are there any hidden CV's that are not in the data book that come with the decoder?
Many thanks