On the scrounge for various common / small bits to start out

[ThomasDadDurham]

absolute first attempt at running a track and want to do a passing loop:

• Power connectors (need 2 pairs - I bought some start set controllers but was given no connectors with them, doh!)
• LGB 10153 isolator x2
• Misc bits of short straight to help me match up odd lengths rather than have to cut the 60cm's which is all I have. After a handful of 5cm to 30cm bits.
• LGB Points (1 LH and 1 RH, plus ideally the single curve to go with)

hoping I can pick some of these up cheaper than eBay?
Thanks

 

[Gizzy]

I have some isolators and a couple of R1 curves. I may be persuaded to part with a pair of R1 points too!

Send me a PM and we'can discuss further....

 

[AlanL]

Misc bits of short straight to help me match up odd lengths rather than have to cut the 60cm's which is all I have. After a handful of 5cm to 30cm bits.

I have a large assortment of odd lengths of rail. They are various off cuts from long lengths of flexi track that has been used extensively on my railway. I should have some sleepers too!

If you are interested, I'll have look at what I have.

Looking forward to seeing your progress.

Alan

 

[korm kormsen]

LGB 10153 isolator x2

if you are into DIY thingies, take a look here: how to - wie gemacht (scroll down to second item)

 

[Paul M]

if you are into DIY thingies, take a look here: how to - wie gemacht (scroll down to second item)

Interesting thing about the milk containers. The holders lookk very useful

 

[korm kormsen]

Interesting thing about the milk containers. The holders lookk very useful

but that is only a shorttime solution.
after eleven years the material of the first one got so brittle, that it broke around the mounting-bolts.
today, after twelve years, the other two still hold strong.

 

[DRG11]

Hi, I have the small radius right hand point (Aristocraft), some small curves and odd bits of striaght track if any good to you ?, send me a PM and I will sort it out for you.