Occre Adler coaches 1:24

W

wrighizilla

Registered
Country flag
Having built the Adler locomotive I could not resist building its passenger carriages.
they are 3 different carriages.
this is the kit

Coches Adler. Modelismo ferroviario de OcCre. Ferromodelismo.

Maqueta Coches Adler, en kit; para montar. Piezas de madera precortada, de gran calidad, para un perfecto armado del modelo. Modelismo ferroviario. Ferromodelismo. Servicio de atención al cliente. Modelo de gran realismo, con todo lujo de detalles
catalog.occre.com catalog.occre.com

I started from the first class carriage.

P1013296.jpg


P1013302.jpg


I lit the first and second class carriages. probably in 1830 they wouldn't have had the light but I think it's nice to see them go with light on

P1013318.jpg


P1013322.jpg


P1013327.jpg


P1013329.jpg


P1013377.jpg


this is the result, the finished first class carriage.

P1013402.jpg


P1013403.jpg


P1013405.jpg


P1013353.jpg


P1013406.jpg
 
Well done! You did a fantastic job on a difficult model. I know, because I bought the same kit. I had difficulty bending the wood that forms the curved bottom front and back sides. Would you mind sharing the technique you used to bend the wood panels?

Thanks for the great photos.

p.s Your lighting power pickups underneath the carriages seems to be a origiunal home-made design. I think I figured it out. Does the steel axle transfer power from the wheels to a bare metal wire touching the axle?

John Carmichael
Tucson, Arizona
 
thank you!!
the handmade brass tabs touch the wheel rings.
the axle is insulated, the wheels are made of wood.
maybe sometimes there is some led light flickering but it depends a lot if the track it is well cleaned.
to bend the wood I first engraved lines, this helps a lot.
aesthetically it is good because they look like wooden boards and remain inside the cabins
then I soaked the wood for 20 minutes in hot water but only at the bottom under the windows otherwise it weakens.
finally I bent the wood by hands onto a very hot metal tube until it dried.
for the pipe I often use a soldering iron or a 20-30mm diameter water pipe that I can heat from the inside with a gas pen or some candles

I leave you the complete photo gallery so if you want to see the construction of the 3 carriages it could help

postimg.cc

Occre Adler Coaches — Postimages

postimg.cc postimg.cc
 
Fantastic build, they really do look great.
Can I ask, would the coaches have been lit? I thought the very early coaches hadn't got that far in the comfort stakes
 
Paul M said:
Fantastic build, they really do look great.
Can I ask, would the coaches have been lit? I thought the very early coaches hadn't got that far in the comfort stakes
Click to expand...
You are probably correct, but between the second and third pictures in post #1, he invokes rule #8.
 
Paul M said:
True, but I was only asking out of curiosity really, not commenting on the build as such.
Click to expand...
I'm pretty sure they didn't have lights, also because we're talking about 1835 carriages.
but do you want to compare the satisfaction seeing it run illuminated? :inlove:
also because my railroad is indoor.
 
Last edited:
Well it doesn't happen often but you've done it, I am lost for words to say how nice those models look, figure painting is also something I like to get correct for the period but again your figures are spot on.
Definitely something to aspire to, thanks for sharing.

David
 
You must log in or register to reply here.
Back
Top Bottom