My Loco Sound Diesel Card making odd noises

[dunnyrail]

Note the odd sounds, tried to reset the card using the correct remote control but this will not work though all the sounds are activated by the Remote.

 

[Gizzy]

Sounds like PWM interference to me....

 

[PhilP]

PWM getting into the card, or speaker..

Only needs a stray whisker of wire, as the motor and speaker terminals are adjacent to each other
You will have to open the loco up, and have a look - see..

PhilP.

 

[dunnyrail]

Sounds like PWM interference to me....

PWM getting into the card, or speaker..

Only needs a stray whisker of wire, as the motor and speaker terminals are adjacent to each other
You will have to open the loco up, and have a look - see..

PhilP.

Ok many thanks, will pull it apart (again) to see. Just recently put it back together after a faulty chip replacement.

 

[Rhinochugger]

Ok many thanks, will pull it apart (again) to see. Just recently put it back together after a faulty chip replacement.

Yes, it only happens to the smallest and most intricate battery conversions

 

[Moonraker]

Note the odd sounds, tried to reset the card using the correct remote control but this will not work though all the sounds are activated by the Remote.

I think this is an easy problem. The whistling sound is the turbocharger which is provided for heavy diesels. I think you have accidentally enabled it.

With your TV remote, press Mute, press the 5 button repeatedly until you hear just one beep then press Mute again to get back to normal operation.

Please email me at sales@mylocosound.com if that does not do the trick.

Regards
Peter Lucas
MyLocoSound

 

[dunnyrail]

I think this is an easy problem. The whistling sound is the turbocharger which is provided for heavy diesels. I think you have accidentally enabled it.

With your TV remote, press Mute, press the 5 button repeatedly until you hear just one beep then press Mute again to get back to normal operation.

Please email me at sales@mylocosound.com if that does not do the trick.

Regards
Peter Lucas
MyLocoSound

Hi Peter many thanks that has resolved my issue.