Massoth XLS sound assignment

[Loco]

Hi,

I have a RhB Ge 4/4 III with a Massoth XLS installed by a dealer in 2006, and I am looking for the sound sheet and sound assignment for that decoder and some help with the programming.

I am trying to move the assignment of sounds around a bit to different Function keys, but have problems with moving sounds to anything from F9-F16. F1-F8 is no problem. I have set CV49=2 (load control on and only parallel data transfer), the latter to be able to access function keys beyond F12.

According to the current sound sheet available on the Massoth web-site the following sound default assignment is like this:
F-key Sound
1 Horn
2 Brakes
3 Horn with Echo
and so on...

When I do a reset of the sound CV131-167 (CV7=111) I get this sound arrangement:
F-key Sound
1 Horn
2 Horn with Echo
3 Brakes
.......etc

I assume this early Massoth XLS decoder has a different assignment than more recent versions?
Also, I do not understand why I cannot program any sound to a new function key from F9-F16.

 

[muns]

Taken from a sound datasheet dated 31/01/08 the sounds are:

[size=12pt]

1 Horn 1 (131) 0 (151) 3 (201)​

2 Brakes 2 (132) 0 (152) 3 (202)​

3 Horn with Echo 3 (133) 0 (153) 3 (203)​

4 Announcement 1 ?All aboard? 4 (134) 0 (154) 3 (204) (German)​

5 Compressor 9 (135) 0 (155) 3 (205)​

6 Vacuum Pump 10 (136) 0 (156) 3 (206)​

7 Panthograph up 11 (137) 0 (157) 3 (207)​

8 Panthograph down 12 (138) 0 (158) 3 (208)​

9 Announcement 2 ?Track 2, incoming​

train​

13 (139) 0 (159) 3 (209) (German)​

10 JubijodlerMain Switch 14 (140) 0 (160) 3 (210) (German)​

11 Main Switch 15 (141) 0 (161) 3 (211)​

12 Starting Signal 0 (142) 0 (162) 3 (212) No F-Key Assignment
[/size]

Yes CV7 =111 is an early version.

I have a manual for the 1.2 version but no earlier. PM me your email address and I'll send it to you

 

[muns]

In the 1.2 manual, it would seem that you can only use FKey 1 thru FKey 12 to trigger sounds.