F7 in G-scale 45mm

[AndyG1955]

Hi All, I've been busy.

Have done designs for an F7-A unit (close enough) with full mechanism.. also a F7-B unit and several coach designs with interiors (semi-fictional)

Enough to make a full Super Chief if you have the printing time ;-).

G-scale F7, motorised by Andy_G1955

This is one of several "things" that I have been working on for a Super Chief style train in G-scale. (not 100% accurate, but close enough)I will run off battery with radio control. If you want pickup from the track, you will have to figure that out yourself, sorry.It could probably be...

www.thingiverse.com

I think it might be possible scaled and adapted to 32mm track, but you would have to think about the bearings used in the mechanism.

Couple of other things in the works too, Such as a MoPac Eaglette, A Turbo Train, mechanism for G-scale Thomas (Motorisation of Thomas by Andy_G1955), as well as Percy and Toby

 

[Djjerme]

OK, this is amazing!

I saw your Overland model before and have it in my "to be printed" que, but this is one that has been on my bucket list. Mainly, I have wanted to model the consist from Runaway Train (great movie if you haven't seen it) and the covered wagon was always the biggest hurdle in large scale. It'll take a bit to make it match the Alaska Railroad unit used in the movie, but this is a perfect start...

 

[AndyG1955]

Thanks. Lots of work and almost certainly lots of minor juggling needed as I built it.

All printed now, I will look to put it together next week, so there will almost certainly be minor changes needed to files. Still waiting for the motors to arrive.

I think I will tap some holes from under the chassis so that the body is removable.. I didn't think enough about that aspect, maybe consider that as you play with the files.

Wish I could get "clear" filament to print "clear" for the windows, I may just use some clear plastic behind the windows instead.

cheers and good luck

AG