Cost of running ender 3 pro

[mike]

33.48 per kwh..
Is my current price. ..
I ran the printer for a hour printing at
228 nozzle pla+ , 65 bed temp..house was 8degrees ..
Printer used 0.125kw
33.48 x. 0.125 = cost to print per hour
I used a cheap plug from ebay that tells you the costing,use of a aplances, at £12.99? A relief to my wallet

and it's 4.1 p...per hour to run it

 

[JimmyB]

33.48 per kwh..
Is my current price. ..
I ran the printer for a hour printing at
228 nozzle pla+ , 65 bed temp..house was 8degrees ..
Printer used 0.125kw
33.48 x. 0.125 = cost to print per hour
I used a cheap plug from ebay that tells you the costing,use of a aplances, at £12.99? A relief to my wallet

and it's 4.1 p...per hour to run it

33.48 (what) per kwh - I assume pence!

 

[Rhinochugger]

33.48 (what) per kwh - I assume pence!

Isn't that the price cap cost?

 

[Paul M]

33.48 per kwh..
Is my current price. ..
I ran the printer for a hour printing at
228 nozzle pla+ , 65 bed temp..house was 8degrees ..
Printer used 0.125kw
33.48 x. 0.125 = cost to print per hour
I used a cheap plug from ebay that tells you the costing,use of a aplances, at £12.99? A relief to my wallet

and it's 4.1 p...per hour to run it

Now we know how much to charge No2 Child

 

[mike]

Isn't that the price cap cost?

Yes..my current cost per kwh ,not included the standing charge

 

[dunnyrail]

Yes..my current cost per kwh ,not included the standing charge

Probably not fair to count the standing charge, that bit of evilness not able to be got away with.

 

[PhilP]

But it should be apportioned.. As should the cost of filament, energy to run the computer to draw the item, a cost for your time, coffee and cake consumed..

But I grant you, a few pence an hour, is good to know.
Insignificant, compared to the last twenty seconds, of computer-time 'viewing' EvilBay!


PhilP

 

[mike]

I should add... the printer will not work below 5 degrees...
Erro message ..
Wife thought I'd turned heating on for her..
Printer reset at 6...

 

[mike]