Accucraft Sabrina R/C pics needed

S

steamhostler

Indoors SM32 Live Steam modeling in the USA
Country flag
I'v accumulated all the parts to R/C my Accucraft Sabrina - RCS R/C control system, Tx, Rx, 2 servos, on/off harness, also have a couple of servo mounts on hand, 2mm wire linkages with turnbuckles, a 4 AA battery box mount, and a 90 degree linkage gizmo which I'm told is for the throttle linkage.

Now all I need is a picture of the cab of an R/C'd Sabrina to see exactly how its all put together.
Can anybody help?
Thanks!

James
Grandview Light Railway
 
normally under the right tank there are 4 pre drilled holes for a standard servo,

from there you can either run a rod to the reverser lever in the cab or straight to the pivot that gotos to the cylinder.

the above is all based on my accuracy ragleth, which is currently tucked away unavailabe for photos

Dan
 
a98087 said:
normally under the right tank there are 4 pre drilled holes for a standard servo,

from there you can either run a rod to the reverser lever in the cab or straight to the pivot that gotos to the cylinder.

the above is all based on my accuracy ragleth, which is currently tucked away unavailabe for photos

Dan
Click to expand...
There is no right or left tank on a Sabrina, it's a saddle tank engine
 
You must log in or register to reply here.
Back
Top Bottom