Hello all,
First time post to the forums so forgive me if this is not the appropriate place to post this question.
I am in the process of ‘restoring’ a Playmobil train set for my son and needless to say - there is loads of corrosion. So much so that the metal on the battery contacts has deteriorated.
I am thinking the best solution is to remove the existing copper strips/contacts and try and cut/manufacture new ones from a sheet of thin copper.
I would appreciate anyone being able to weigh in on the situation.
Thanks in advance!
~JT
First time post to the forums so forgive me if this is not the appropriate place to post this question.
I am in the process of ‘restoring’ a Playmobil train set for my son and needless to say - there is loads of corrosion. So much so that the metal on the battery contacts has deteriorated.
![6ACDD167-D66B-47BF-B686-548F9928072D.jpeg 6ACDD167-D66B-47BF-B686-548F9928072D.jpeg](https://cdn.gscalecentral.net/2022/11/thumb/468099_6ACDD167-D66B-47BF-B686-548F9928072D.jpeg)
I would appreciate anyone being able to weigh in on the situation.
Thanks in advance!
~JT