December 19, 2014, 09:59:45 AM

Author Topic: LGB 55045 software question.  (Read 1234 times)

0 Members and 1 Guest are viewing this topic.

Offline Neil Robinson

LGB 55045 software question.
« on: February 21, 2010, 03:03:34 PM »
 I'm in a bit of a panic as I offered to fit and program an ESU Loksound XL chip for a mate by the end of the week.
     I was reasonably confident as I'd sorted an ESU non sound chip that used the same instruction book for another mate a couple of years ago using my LGB MTS 55045 module.
     However all is not going smoothly this time. Since my previous effort my son has upgraded my computer so today I had to reinstall the MTS software from the disc. This is V5.0, I wonder was a later version available available to download from the web, and if so is it still available? I ask as I now can't access CVs above 127, also when click on "Read out main data" it only gets as far as CV9 then gives up.
     Doubtless I'll need further help before the sound is sorted, but I really need to know how to access the higher CVs before I can make any progress. My memory may be faulty but I can't see how I could have configured the unit I did a couple of years ago without accessing these higher CVs.

Offline muns

Re:LGB 55045 software question.
« Reply #1 on: February 21, 2010, 03:06:34 PM »
 PM sent.....
     You can also use the Massoth Software to with the '045
Running trains powered through the rail with DCC from Massoth on the edge of the New Forest, Hampshire, UK.

For all things Massoth, ESU and LGB go to
Follow GRO on Facebook

Offline Neil Robinson

Re:LGB 55045 software question.
« Reply #2 on: February 21, 2010, 10:05:55 PM »
 Many thanks indeed, now I can get at all of the CVs.
     I still have some issues with the decoder, so I'll phone the UK main agent for advice. Thanks to muns I'll be able to implement any CV changes they may suggest.

Offline Dan

Re:LGB 55045 software question.
« Reply #3 on: February 22, 2010, 12:03:59 PM »
 LGB latest software was version 6.00.0004
 Massoth software will work, but you must select a dummy input file when using the 55045.
 I have the LGB V6 software, it is 28 meg in size.

Offline RoshamboUK

Re:LGB 55045 software question.
« Reply #4 on: April 15, 2011, 08:02:10 PM »
 I am also looking for a copy of the latest version of the MTS software... Cant seem to find it anywhere... any ideas where i can get this from?

Offline MohammedB

Re:LGB 55045 software question.
« Reply #5 on: April 16, 2011, 06:17:15 PM »
 PM me your e-mail address and I will e-mail you version 6 installation files